On 04/01/2010 03:17 PM, Michal Simek wrote: > > I am strongly against this style of adding any specific nios board to > U-BOOT. > > 1. I am not convinced that all information from 2c35_cf.h are > important for U-BOOT. > What connection has for example "#define KERNEL_REGION_BASE 0xc0000000"? > or others. > +#define PLL_COMPONENT_TYPE altera_avalon_pll > +#define PLL_COMPONENT_NAME pll > +#define PLL_BASE 0x1000020 > +#define PLL_SPAN 32 > > It is the same situation as we solved for Xilinx boards. > Create generic nios board and then generate only parameters which are > necessary for U-BOOT itself. > For example I am using only one microblaze generic board to cover all > microblaze boards. > Look at Microblaze or ppc405/440 solution. board/xilinx is good start > for you. > >
Hi Michal, Thank you very much for the suggestions. Your experiences are invaluable to us. I will trim down the fpga parameter file. I will keep only one board configuration to serve as nios2-generic template, and remove other two. Best regards, Thomas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
