On Mon, Oct 22, 2018 at 9:13 AM Jean-Jacques Hiblot <jjhib...@ti.com> wrote: > > This series remove the usage of the DM_I2C_COMPAT option for all the ti > platforms. It also takes this opportunity to not disable DM_I2C in the SPL. > > There are a couples of issues to fix: > - CMD_EEPROM does not support the DM API. Fixed by removing this option > when DM_I2C is used without DM_I2C_COMPAT > - i2c_get_chip_for_busnum() does not work when OF_CONTROL is not used > (as is the case with am33xx SPL). > - The I2C driver do not support DM_I2C without OF_CONTROL. > - Most of the PMIC drivers do not support the I2C DM API. > - Board detection is done prior DM initialization. Fixed by moving it after > DM is initialized. That move breaks the DRA7 platforms (The fixes for > that are at the last 5 patches this series) > > When all this is taken care of DM_I2C_COMPAT can be removed and DM_I2C > enabled in the SPL. > > This has been tested with the following boards: > - am437x SK > - am335x SK > - am335x beaglebone (both DM and non-DM config) > - dra76 evm > - am572 evm > - k2g evm > > The following targets may be impacted by the changes related to > SPL_OF_CONTROL and SPL_OF_PLATDATA: > - am3517_evm_defconfig > - omap3_logic_defconfig > - chromebit_mickey_defconfig > - chromebook_jerry_defconfig > - chromebook_minnie_defconfig > - evb-rk3399_defconfig > - rock_defconfig > > It would be nice it some of you could try to boot them. > > I applied the entire 19-patch series and it worked for me. Thanks!
Tested-by Adam Ford <aford...@gmail.com> #omap3_logic & am3517_evm adam > Changes in v3: > - removed commit introducing dm_i2c_probe_device(). Instead probe the > presence of the chip on the I2C bus in i2c_get_chip_for_busnum(). > - fdtdec_resetup() need not call fdtdec_setup() when only a single DTB is > used. > - Add documentation in README-fdt-control explaining why and how to use > fdtdec_resetup() > > Changes in v2: > - Add missing commit log to the commit disabling CMD_EEPROM when non-DM API > is not available > - don't use the DT to find the req_seq number if SPL_OF_PLATDATA is used. > Instead do it as if SPL_OF_CONTROL is not defined. > - Also add DM_I2C support to the twl6030 driver > - remove the remaining non-DM I2C API call for pdu001 board. > - Fixed warning in power_init_board() for the am43xx ti boards. > > Andreas Dannenberg (1): > ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT > > Jean-Jacques Hiblot (17): > cmd: Kconfig: Do not include EEPROM if DM_I2C is used without > DM_I2C_COMPAT > dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not > detected > dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL > configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS > i2c: omap24xx_i2c: Use platdata to probe the device > am335x: Register the I2C controllers if DM_I2C is used. > dts: am43x: omap5: Add node for I2C in SPL > omap: detect the board after DM is available > power: make most tps drivers and the twl4030 driver compatible with > DM_I2C > configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT > ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL > am57xx: remove non-DM I2C code > configs: dra7xx-evm: increase the size of the malloc's pool before > relocation > lib: fdtdec: Add function re-setup the fdt more effeciently > drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig > drivers: core: nullify gd->dm_root after dm_uninit() > dra7: Allow selecting a new dtb after board detection. > > Vignesh R (1): > i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset > > arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 4 + > arch/arm/dts/omap5-u-boot.dtsi | 4 + > arch/arm/include/asm/arch-am33xx/i2c.h | 47 +-- > arch/arm/include/asm/arch-omap3/i2c.h | 47 --- > arch/arm/include/asm/arch-omap4/i2c.h | 45 --- > arch/arm/include/asm/arch-omap5/i2c.h | 45 --- > arch/arm/include/asm/omap_i2c.h | 24 ++ > arch/arm/mach-keystone/ddr3_spd.c | 7 + > arch/arm/mach-omap2/am33xx/board.c | 24 +- > arch/arm/mach-omap2/am33xx/clk_synthesizer.c | 56 +++- > arch/arm/mach-omap2/clocks-common.c | 2 + > arch/arm/mach-omap2/hwinit-common.c | 23 +- > board/eets/pdu001/board.c | 1 - > board/ti/am335x/board.c | 17 +- > board/ti/am335x/mux.c | 11 + > board/ti/am43xx/board.c | 46 ++- > board/ti/am57xx/board.c | 25 +- > board/ti/common/board_detect.c | 110 +++---- > board/ti/ks2_evm/board_k2g.c | 11 + > cmd/Kconfig | 1 + > configs/am335x_pdu001_defconfig | 1 + > configs/am57xx_evm_defconfig | 1 + > configs/am57xx_hs_evm_defconfig | 1 + > configs/dra7xx_evm_defconfig | 4 +- > configs/dra7xx_hs_evm_defconfig | 1 + > configs/omap3_logic_defconfig | 1 + > doc/README.fdt-control | 18 ++ > drivers/core/Kconfig | 12 +- > drivers/core/device.c | 10 +- > drivers/core/root.c | 1 + > drivers/core/uclass.c | 24 ++ > drivers/i2c/i2c-uclass.c | 11 + > drivers/i2c/omap24xx_i2c.c | 467 > ++++++++++++++++++--------- > drivers/power/palmas.c | 39 +++ > drivers/power/pmic/pmic_tps62362.c | 24 ++ > drivers/power/pmic/pmic_tps65217.c | 44 ++- > drivers/power/pmic/pmic_tps65218.c | 85 +++++ > drivers/power/pmic/pmic_tps65910.c | 57 +++- > drivers/power/twl4030.c | 39 +++ > drivers/power/twl6030.c | 39 +++ > include/asm-generic/global_data.h | 4 + > include/configs/am43xx_evm.h | 2 + > include/configs/pdu001.h | 6 - > include/configs/ti_armv7_common.h | 18 +- > include/dm/uclass-internal.h | 13 + > include/fdtdec.h | 21 ++ > include/palmas.h | 5 + > include/power/tps65217.h | 2 + > include/power/tps65910.h | 1 + > include/twl4030.h | 6 +- > include/twl6030.h | 5 + > lib/fdtdec.c | 43 ++- > 52 files changed, 1083 insertions(+), 472 deletions(-) > create mode 100644 arch/arm/include/asm/omap_i2c.h > > -- > 2.7.4 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
