Dear Matthias, In message <569685f045b85741820d0265e0d2999d019cf...@tddhh01.hh.thales-naval.de> you wrote: > > > Hm... this is U-Boot release v2009.11.1, correct? > > Yes correct, but it happens in 2009.08, too.
Strange... > The output of ppc_85xx-nm *.o in disk/ looks a little "weak": > > part_dos.o: > > part.o: > 00000000 T get_dev > Indeed. That's nothing. > The only change I applied before is > > 419a420 > > #define CONFIG_DOS_PARTITION > 430a432,433 > > #define CONFIG_CMD_EXT2 > > #define CONFIG_CMD_FAT > > to include/configs/MPC8568MDS.h It seems you are missing the device driver support. If you check the code in "disk/part.c" you will see this: ... 218 #if (defined(CONFIG_CMD_IDE) || \ 219 defined(CONFIG_CMD_MG_DISK) || \ 220 defined(CONFIG_CMD_SATA) || \ 221 defined(CONFIG_CMD_SCSI) || \ 222 defined(CONFIG_CMD_USB) || \ 223 defined(CONFIG_MMC) || \ 224 defined(CONFIG_SYSTEMACE) ) 225 226 #if defined(CONFIG_MAC_PARTITION) || \ 227 defined(CONFIG_DOS_PARTITION) || \ 228 defined(CONFIG_ISO_PARTITION) || \ 229 defined(CONFIG_AMIGA_PARTITION) || \ 230 defined(CONFIG_EFI_PARTITION) ... You have CONFIG_DOS_PARTITION defined, which satisfies the second block conditions; please check if you also have IDE, MG_DISK, SATA, SCSI, USB, MMC or SYSTEMACE enabled in your configuration - and if not, then please explain which device you actually intend to use? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de It is clear that the individual who persecutes a man, his brother, because he is not of the same opinion, is a monster. - Voltaire _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
