Hello Maxime,
Il 24/10/2018 19:59, Maxime Ripard ha scritto:
On Wed, Oct 24, 2018 at 03:59:56PM +0200, Giulio Benetti wrote:
Hello Jagan and Maxime,
I've looked around a lot, but I can't find a way to use the board/sunxi:
http://git.denx.de/?p=u-boot.git;a=tree;f=board/sunxi;h=304ee6b4cc8e075759d3bd0beb250b56f6901702;hb=HEAD
to fit what we need.
We have 5 gpios that control the max current setting on
current-driver for Backlight biasing shunt kathode resistor, and I
don't know where to place the code to set those pins.
I would like to avoid to create another new board if possible, since
board/sunxi has everything we need to make our board operative.
In general, is there some sort of __weak__ hooks to be used to extend an
existing board?
Because I understand that probably you wouldn't add this code I'm talking
about inside board/sunxi.
This request is done with idea to upstream patch for this board.
Can you help me?
If that's backlight related, maybe you can just create a new backlight
driver?
If it makes sense for sure we can.
But please can you take a look at the schematics of current-driver with
mosfets biasing power?
https://pasteboard.co/HK4ChzF.png
As you can see we bias BKL_K (Backlight Kathode) to slightly influence
the shunt(R81+R76).
I don't know how it could be useful for the others.
We use that to handle different displays with the same board(A20 based).
So does it make sense to write a driver?
And if yes, I would think about adding:
backlight_current.c under u-boot/drivers/video
or another option could be to write a driver under:
u-boot/drivers/power
What do you think?
We only need a road to follow to be upstreamed later.
Thanks a lot
Best regards
--
Giulio Benetti
CTO
MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
