On 16.10.18 16:51, Michal Simek wrote: > On 16.10.2018 16:23, Alexander Graf wrote: >> > > ... > >>> +#define ENV_MEM_LAYOUT_SETTINGS \ >>> + "fdt_high=10000000\0" \ >>> + "initrd_high=10000000\0" \ >>> + "fdt_addr_r=0x40000000\0" \ >>> + "pxefile_addr_r=0x10000000\0" \ >>> + "kernel_addr_r=0x18000000\0" \ >>> + "scriptaddr=0x02000000\0" \ >>> + "ramdisk_addr_r=0x02100000\0" >>> + >>> +#define BOOT_TARGET_DEVICES(func) \ >>> + func(PXE, pxe, na) \ >>> + func(DHCP, dhcp, na) >> >> You seem to support SD as well, shouldn't that be in here too? > > Right now this is align with what devices are wired in qemu. > Some Kconfig are enabled for SD and QSPI, etc. We will all these devices > in future for sure.
Ah, ok, I figured since I saw changes to those components that they're also wired up already. It was hard to tell without the DT :). > But as you know we are only enabling distro default not any internal > commands which should be good sign for you. Yes, this is awesome! :) Alex _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
