This is currently out of order. Sort it. Signed-off-by: Bin Meng <bmeng...@gmail.com> Reviewed-by: Simon Glass <s...@chromium.org>
--- Changes in v3: - rebase on u-boot/master so that patch [4/8] can be applied cleanly Changes in v2: None drivers/timer/Kconfig | 110 +++++++++++++++++++++++++------------------------- 1 file changed, 55 insertions(+), 55 deletions(-) diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index a7d600b..8c0f356 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -37,6 +37,12 @@ config TIMER_EARLY use an early timer. These functions must be supported by your timer driver: timer_early_get_count() and timer_early_get_rate(). +config AG101P_TIMER + bool "AG101P timer support" + depends on TIMER && NDS32 + help + Select this to enable a timer for AG01P devices. + config ALTERA_TIMER bool "Altera timer support" depends on TIMER @@ -44,6 +50,34 @@ config ALTERA_TIMER Select this to enable a timer for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera. +config ARC_TIMER + bool "ARC timer support" + depends on TIMER && ARC && CLK + help + Select this to enable built-in ARC timers. + ARC cores may have up to 2 built-in timers: timer0 and timer1, + usually at least one of them exists. Either of them is supported + in U-Boot. + +config AST_TIMER + bool "Aspeed ast2400/ast2500 timer support" + depends on TIMER + default y if ARCH_ASPEED + help + Select this to enable timer for Aspeed ast2400/ast2500 devices. + This is a simple sys timer driver, it is compatible with lib/time.c, + but does not support any interrupts. Even though SoC has 8 hardware + counters, they are all treated as a single device by this driver. + This is mostly because they all share several registers which + makes it difficult to completely separate them. + +config ATCPIT100_TIMER + bool "ATCPIT100 timer support" + depends on TIMER + help + Select this to enable a ATCPIT100 timer which will be embedded + in AE3XX, AE250 boards. + config ATMEL_PIT_TIMER bool "Atmel periodic interval timer support" depends on TIMER @@ -66,18 +100,12 @@ config DESIGNWARE_APB_TIMER Enables support for the Designware APB Timer driver. This timer is present on Altera SoCFPGA SoCs. -config SANDBOX_TIMER - bool "Sandbox timer support" - depends on SANDBOX && TIMER - help - Select this to enable an emulated timer for sandbox. It gets - time from host os. - -config X86_TSC_TIMER - bool "x86 Time-Stamp Counter (TSC) timer support" - depends on TIMER && X86 +config MPC83XX_TIMER + bool "MPC83xx timer support" + depends on TIMER help - Select this to enable Time-Stamp Counter (TSC) timer for x86. + Select this to enable support for the timer found on + devices based on the MPC83xx family of SoCs. config OMAP_TIMER bool "Omap timer support" @@ -85,17 +113,19 @@ config OMAP_TIMER help Select this to enable an timer for Omap devices. -config AST_TIMER - bool "Aspeed ast2400/ast2500 timer support" +config ROCKCHIP_TIMER + bool "Rockchip timer support" depends on TIMER - default y if ARCH_ASPEED help - Select this to enable timer for Aspeed ast2400/ast2500 devices. - This is a simple sys timer driver, it is compatible with lib/time.c, - but does not support any interrupts. Even though SoC has 8 hardware - counters, they are all treated as a single device by this driver. - This is mostly because they all share several registers which - makes it difficult to completely separate them. + Select this to enable support for the timer found on + Rockchip devices. + +config SANDBOX_TIMER + bool "Sandbox timer support" + depends on SANDBOX && TIMER + help + Select this to enable an emulated timer for sandbox. It gets + time from host os. config STI_TIMER bool "STi timer support" @@ -104,47 +134,17 @@ config STI_TIMER help Select this to enable a timer for STi devices. -config ARC_TIMER - bool "ARC timer support" - depends on TIMER && ARC && CLK - help - Select this to enable built-in ARC timers. - ARC cores may have up to 2 built-in timers: timer0 and timer1, - usually at least one of them exists. Either of them is supported - in U-Boot. - -config AG101P_TIMER - bool "AG101P timer support" - depends on TIMER && NDS32 - help - Select this to enable a timer for AG01P devices. - -config ATCPIT100_TIMER - bool "ATCPIT100 timer support" - depends on TIMER - help - Select this to enable a ATCPIT100 timer which will be embeded - in AE3XX, AE250 boards. - -config ROCKCHIP_TIMER - bool "Rockchip timer support" - depends on TIMER - help - Select this to enable support for the timer found on - Rockchip devices. - config STM32_TIMER - bool "STM32 timer support" + bool "STM32 timer support" depends on TIMER help Select this to enable support for the timer found on STM32 devices. -config MPC83XX_TIMER - bool "MPC83xx timer support" - depends on TIMER +config X86_TSC_TIMER + bool "x86 Time-Stamp Counter (TSC) timer support" + depends on TIMER && X86 help - Select this to enable support for the timer found on - devices based on the MPC83xx family of SoCs. + Select this to enable Time-Stamp Counter (TSC) timer for x86. endmenu -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot