On 10/10/2018 02:55 PM, Simon Goldschmidt wrote:
> This patch prevents disabling the FPGA bridges when
> SPL or U-Boot is executed from FPGA onchip RAM.
> 
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
> ---
> 
> Changes in v5:
> - changed inline function 'socfpga_is_fpga_slaves_addr(addr)'
>   to 'socfpga_is_booting_from_fpga()'
> 
> Changes in v4:
> - use an inline function in misc.h to check for the address
>   range instead of a macro in base_addr_ac5.h
> 
> Changes in v3:
> - use __image_copy_start to check if we are executing from FPGA
> 
> Changes in v2:
> - use less ifdefs and more C code for address checks
>   (but this gives a checkpatch warning because of comparing two
>   upper case constants)
> - changed comments
> 
>  arch/arm/mach-socfpga/include/mach/base_addr_ac5.h |  1 +
>  arch/arm/mach-socfpga/include/mach/misc.h          |  9 +++++++++
>  arch/arm/mach-socfpga/misc_gen5.c                  |  9 ++++++++-
>  arch/arm/mach-socfpga/spl_gen5.c                   | 10 +++++++---
>  4 files changed, 25 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h 
> b/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
> index bb9e3faa29..2725e9fcc3 100644
> --- a/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
> +++ b/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
> @@ -6,6 +6,7 @@
>  #ifndef _SOCFPGA_BASE_ADDRS_H_
>  #define _SOCFPGA_BASE_ADDRS_H_
>  
> +#define SOCFPGA_FPGA_SLAVES_ADDRESS  0xc0000000
>  #define SOCFPGA_STM_ADDRESS          0xfc000000
>  #define SOCFPGA_DAP_ADDRESS          0xff000000
>  #define SOCFPGA_EMAC0_ADDRESS                0xff700000
> diff --git a/arch/arm/mach-socfpga/include/mach/misc.h 
> b/arch/arm/mach-socfpga/include/mach/misc.h
> index 4fc9570a04..26609927c8 100644
> --- a/arch/arm/mach-socfpga/include/mach/misc.h
> +++ b/arch/arm/mach-socfpga/include/mach/misc.h
> @@ -6,6 +6,8 @@
>  #ifndef _MISC_H_
>  #define _MISC_H_
>  
> +#include <asm/sections.h>
> +
>  void dwmac_deassert_reset(const unsigned int of_reset_id, const u32 phymode);
>  
>  struct bsel {
> @@ -23,6 +25,13 @@ static inline void socfpga_fpga_add(void) {}
>  
>  #ifdef CONFIG_TARGET_SOCFPGA_GEN5
>  void socfpga_sdram_remap_zero(void);
> +static inline bool socfpga_is_booting_from_fpga(void)
> +{
> +     if ((__image_copy_start >= (char *)SOCFPGA_FPGA_SLAVES_ADDRESS) &&
> +         (__image_copy_start < (char *)SOCFPGA_STM_ADDRESS))
> +             return true;
> +     return false;
> +}
>  #endif
>  
>  #ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
> diff --git a/arch/arm/mach-socfpga/misc_gen5.c 
> b/arch/arm/mach-socfpga/misc_gen5.c
> index 429c3d6cd5..5fa40937c4 100644
> --- a/arch/arm/mach-socfpga/misc_gen5.c
> +++ b/arch/arm/mach-socfpga/misc_gen5.c
> @@ -177,6 +177,8 @@ static void socfpga_nic301_slave_ns(void)
>  
>  void socfpga_sdram_remap_zero(void)
>  {
> +     u32 remap;
> +
>       socfpga_nic301_slave_ns();
>  
>       /*
> @@ -187,7 +189,12 @@ void socfpga_sdram_remap_zero(void)
>       setbits_le32(&scu_regs->sacr, 0xfff);
>  
>       /* Configure the L2 controller to make SDRAM start at 0 */
> -     writel(0x1, &nic301_regs->remap);       /* remap.mpuzero */
> +     remap = 0x1; /* remap.mpuzero */
> +     /* Keep fpga bridge enabled when running from FPGA onchip RAM */
> +     if (socfpga_is_booting_from_fpga())
> +             remap |= 0x8; /* remap.hps2fpga */
> +     writel(remap, &nic301_regs->remap);
> +
>       writel(0x1, &pl310->pl310_addr_filter_start);
>  }
>  
> diff --git a/arch/arm/mach-socfpga/spl_gen5.c 
> b/arch/arm/mach-socfpga/spl_gen5.c
> index be318cc0d9..ccdc661d05 100644
> --- a/arch/arm/mach-socfpga/spl_gen5.c
> +++ b/arch/arm/mach-socfpga/spl_gen5.c
> @@ -92,8 +92,11 @@ void board_init_f(ulong dummy)
>  
>       /* Put everything into reset but L4WD0. */
>       socfpga_per_reset_all();
> -     /* Put FPGA bridges into reset too. */
> -     socfpga_bridges_reset(1);
> +
> +     if (!socfpga_is_booting_from_fpga()) {
> +             /* Put FPGA bridges into reset too. */
> +             socfpga_bridges_reset(1);
> +     }
>  
>       socfpga_per_reset(SOCFPGA_RESET(SDR), 0);
>       socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
> @@ -163,5 +166,6 @@ void board_init_f(ulong dummy)
>               hang();
>       }
>  
> -     socfpga_bridges_reset(1);
> +     if (!socfpga_is_booting_from_fpga())
> +             socfpga_bridges_reset(1);
>  }
> 
Applied, thanks !

-- 
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to