This patch is to add eSDHC nodes for lx2160a.
Signed-off-by: Yinbo Zhu <yinbo....@nxp.com>
---
arch/arm/dts/fsl-lx2160a-rdb.dts | 8 ++++++++
arch/arm/dts/fsl-lx2160a.dtsi | 24 ++++++++++++++++++++++++
2 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index 162ec25..1d67ba6 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -38,3 +38,11 @@
reg = <0>;
};
};
+
+&esdhc0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
index 12655fc..ad9bfa2 100644
--- a/arch/arm/dts/fsl-lx2160a.dtsi
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -76,6 +76,30 @@
status = "disabled";
};
+ esdhc0: esdhc@2140000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clocks = <&clockgen 4 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ };
+
+ esdhc1: esdhc@2150000 {
+ status = "disabled";
+ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2150000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clocks = <&clockgen 4 1>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ };
+
fspi: flexspi@20c0000 {
compatible = "nxp,lx2160a-fspi";
#address-cells = <1>;
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
