This is needed to set the LEDs automatically to a default state, as
configured in the dts.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
---
arch/mips/mach-mt7620/Kconfig | 1 +
board/gardena/smart-gateway-mt7688/board.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/arch/mips/mach-mt7620/Kconfig b/arch/mips/mach-mt7620/Kconfig
index e42d918ba0..6f6952afd0 100644
--- a/arch/mips/mach-mt7620/Kconfig
+++ b/arch/mips/mach-mt7620/Kconfig
@@ -25,6 +25,7 @@ choice
config BOARD_GARDENA_SMART_GATEWAY_MT7688
bool "Gardena Smart Gateway"
depends on SOC_MT7620
+ select BOARD_LATE_INIT
select SUPPORTS_BOOT_RAM
help
Gardena Smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
diff --git a/board/gardena/smart-gateway-mt7688/board.c
b/board/gardena/smart-gateway-mt7688/board.c
index 838dfc205b..3a1838e44a 100644
--- a/board/gardena/smart-gateway-mt7688/board.c
+++ b/board/gardena/smart-gateway-mt7688/board.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
+#include <led.h>
#include <linux/io.h>
#define MT76XX_AGPIO_CFG 0x1000003c
@@ -18,3 +19,11 @@ int board_early_init_f(void)
return 0;
}
+
+int board_late_init(void)
+{
+ if (IS_ENABLED(CONFIG_LED))
+ led_default_state();
+
+ return 0;
+}
--
2.19.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
