Hi, On Sat, Oct 06, 2018 at 12:07:18PM +0200, Paul Kocialkowski wrote: > This introduces a new defconfig for the BananaPi, which includes support > for the BL035 LCD module distributed by Lemaker for use with this board. > > Signed-off-by: Paul Kocialkowski <cont...@paulk.fr> > --- > configs/Bananapi_LCD_BL035_defconfig | 29 ++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 configs/Bananapi_LCD_BL035_defconfig > > diff --git a/configs/Bananapi_LCD_BL035_defconfig > b/configs/Bananapi_LCD_BL035_defconfig > new file mode 100644 > index 0000000000..b0a8fb9099 > --- /dev/null > +++ b/configs/Bananapi_LCD_BL035_defconfig > @@ -0,0 +1,29 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN7I=y > +CONFIG_DRAM_CLK=432 > +CONFIG_MACPWR="PH23" > +CONFIG_VIDEO_COMPOSITE=y > +CONFIG_VIDEO_LCD_MODE="x:320,y:240,depth:24,pclk_khz:7000,le:38,ri:20,up:15,lo:4,hs:30,vs:3,sync:0,vmode:0" > +CONFIG_VIDEO_LCD_DE_LOW=y > +CONFIG_VIDEO_LCD_POWER="PH12" > +CONFIG_VIDEO_LCD_BL_EN="PH8" > +CONFIG_VIDEO_LCD_BL_PWM="PB2" > +# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set > +CONFIG_GMAC_TX_DELAY=3 > +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" > +CONFIG_AHCI=y > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL_I2C_SUPPORT=y > +# CONFIG_CMD_FLASH is not set > +# CONFIG_SPL_DOS_PARTITION is not set > +# CONFIG_SPL_EFI_PARTITION is not set > +CONFIG_NETCONSOLE=y
This is something of a user configuration, this should be selected by each user if relevant. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
