On Thu, Oct 4, 2018 at 8:04 PM Marek Vasut <ma...@denx.de> wrote: > > On 10/04/2018 08:38 AM, Chris Packham wrote: > > On Thu, Oct 4, 2018 at 11:17 AM Marek Vasut <ma...@denx.de> wrote: > >> > >> On 10/03/2018 10:21 PM, Chris Packham wrote: > >>> Workaround makes FS as default mode on all affected socs. > >>> > >>> Add support to check erratum-A005275 validity for an soc. This info is > >>> required to determine whether a given soc is affected by this erratum. > >>> Add quirk for this erratum "has_fsl_erratum_a005275" . This quirk is used > >>> to enable workaround for the errata > >>> > >>> Force FS mode as default by: > >>> - making EPS as FS > >>> - setting PFSC bit to disable HS chirping > >>> > >>> This workaround can be disabled by mentioning "no_erratum_a005275" in > >>> hwconfig string > >>> > >>> Signed-off-by: Chris Packham <judge.pack...@gmail.com> > >> [...] > >> > >>> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c > >>> index a04f6a31c8e4..71e4ded53100 100644 > >>> --- a/drivers/usb/host/ehci-fsl.c > >>> +++ b/drivers/usb/host/ehci-fsl.c > >>> @@ -93,6 +93,7 @@ static int ehci_fsl_probe(struct udevice *dev) > >>> struct usb_ehci *ehci = NULL; > >>> struct ehci_hccr *hccr; > >>> struct ehci_hcor *hcor; > >>> + struct ehci_ctrl *echi_ctrl = &priv->echi; > >> > >> Was this ever even compile-tested ? See echi_ctrl vs ehci_ctrl below ... > >> > > > > I must confess no. The only targets that use this with DM_USB are > > ARMv8 and I didn't have a toolchain for that. I did test P2040RDB. I > > will fire the next version through travis-ci to catch dumb errors like > > this. > > You can create a repo on github and enable travis to do CI on your > patches every time you push. It has toolchains for all platform > supported by U-Boot.
Thanks I've got travis setup now[1]. But it probably wouldn't help for this particular case. I'm struggling to find a target that configures CONFIG_USB_EHCI_FSL and CONFIG_DM_USB in master (I think there might be some ppc/mpc85xx work in flight). I did manage to enable EHCI_FSL on ls1021aqds_nor_defconfig that showed the error which I've fixed in v2. [1] - https://travis-ci.org/cpackham/u-boot/builds/436987760 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot