Gentle ping.. Thanks, Peng
> -----Original Message----- > From: Peng Fan > Sent: 2018年9月26日 21:52 > To: sba...@denx.de; ag...@denx.de > Cc: u-boot@lists.denx.de; Peng Fan <peng....@nxp.com> > Subject: [PATCH V5 00/32] i.MX: Add i.MX8QXP support > > This patchset is to upstream i.MX8QXP and mek board support, with some > drivers update to support i.MX8QXP. The information about the processor could > be found > https://www.nxp.com/products/processors-and-microcontrollers/applications-p > rocessors/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-co > rtex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X > > The architecture of i.MX8QXP is different from i.MX6/7/8M, inside i.MX8QXP, > there is a dedicated processor(SCU) used for power/clock/pin/ pad/resource > management/thermal and etc. > > > V5: > Addressed Lothar Waßmann's comments for patch 24 and 32. > Rebased on master. > > V4: > Add reviewed tag from Anatolij Gustschin Addressed comments from Anatolig > for patch "misc: add i.MX8 misc driver" > Addressed comments from Anatolig for patch "misc: imx8: add scfw api > impementation" > Merged the files into one > Moved one error handle to patch 4 > Moved patch "arm: global_data: add scu_dev for i.MX8" to patch 7 For Fabio's > comments to imx-mkimage, I'll start the porting work, but needs more time, it > will be not be in this patchset. > > V3: > > patch 7: use CONFIG_IMX8 > patch 29: use CONFIG_IMX8 > patch 32: Added README with scfw_tcm.bin link added > misc: remove sc_rpc_msg_t typedef, use struct sc_rpc_msg_s in patchset. > > V2: > In this V2 patchset, the SCFW API is replaced by uclass driver implementation, > but the api name is not changed from scfw api. > The related macro definitions are kept in different api.h file following SCFW > API > file structure. > > Impelemnted scu misc driver to handle the low level communication between > Acore and SCU. > Implemented rm/pm/pad/misc protocol code to invoke misc_call for different > functionality. > The dm clk/pinctrl/power and others will invokde the protocol api to > communicate with SCU. > > The arch/arm/mach-imx/imx8/clock.c currently is only a dummy file to avoid > build break for mxc_get_clock. > > The i2c patch and common power domain patches are removed from this > patchset. > > The imx8 name still kept, this is because NXP marketing requires to use this > name for i.MX branding. > > > Peng Fan (30): > dt-bindings: pinctrl: add i.MX8QXP pads definition > dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks > definition > dt-bindings: soc: add i.MX8QXP pm and rsrc definition > imx8: add scfw macro definition > imx: add Kconfig entry for i.MX8QXP > arm: build mach-imx for i.MX8 > arm: global_data: add scu_dev for i.MX8 > misc: add i.MX8 misc driver > misc: imx8: add scfw api impementation > imx: boot_mode: Add FLEXSPI boot entry > imx8: add imx-regs header file > imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined > imx: add i.MX8 cpu type > armv8: add cpu core helper functions > imx8: add basic cpu support > imx8: add boot device detection > imx8: implement mmc_get_env_dev > imx8: add mmu and dram related functiions > imx8: add arch_cpu_init arch_cpu_init_dm > imx8: add iomux configuration api > imx8: add dummy clock > gpio: mxc_gpio: add support for i.MX8 > pinctrl: Add pinctrl driver for i.MX8 > power: Add power domain driver for i.MX8 > clk: imx: add clk driver for i.MX8QXP > serial_lpuart: Update lpuart driver to support i.MX8 > serial: lpuart: support uclass clk api > mmc: fsl_esdhc: add uclass clk support > arm: dts: introduce dtsi for i.MX8QXP > imx: add i.MX8QXP MEK board support > > Ye Li (2): > serial: lpuart: Enable RX and TX FIFO > fsl_esdhc: Update usdhc driver to support i.MX8 > > arch/arm/Kconfig | 8 + > arch/arm/Makefile | 2 +- > arch/arm/dts/Makefile | 2 + > arch/arm/dts/fsl-imx8-ca35.dtsi | 66 ++ > arch/arm/dts/fsl-imx8dx.dtsi | 452 +++++++++++++ > arch/arm/dts/fsl-imx8dxp.dtsi | 11 + > arch/arm/dts/fsl-imx8qxp-mek.dts | 136 ++++ > arch/arm/dts/fsl-imx8qxp.dtsi | 51 ++ > arch/arm/include/asm/arch-imx/cpu.h | 5 + > arch/arm/include/asm/arch-imx8/clock.h | 27 + > arch/arm/include/asm/arch-imx8/gpio.h | 21 + > arch/arm/include/asm/arch-imx8/imx-regs.h | 46 ++ > arch/arm/include/asm/arch-imx8/imx8-pins.h | 15 + > arch/arm/include/asm/arch-imx8/iomux.h | 40 ++ > arch/arm/include/asm/arch-imx8/power-domain.h | 15 + > arch/arm/include/asm/arch-imx8/sci/rpc.h | 158 +++++ > arch/arm/include/asm/arch-imx8/sci/sci.h | 86 +++ > arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h | 30 + > arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h | 57 ++ > arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h | 44 ++ > arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h | 69 ++ > arch/arm/include/asm/arch-imx8/sci/types.h | 220 +++++++ > arch/arm/include/asm/arch-imx8/sys_proto.h | 19 + > arch/arm/include/asm/armv8/cpu.h | 26 + > arch/arm/include/asm/global_data.h | 4 + > arch/arm/include/asm/mach-imx/boot_mode.h | 1 + > arch/arm/include/asm/mach-imx/sys_proto.h | 3 + > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/imx8/Kconfig | 26 + > arch/arm/mach-imx/imx8/Makefile | 7 + > arch/arm/mach-imx/imx8/clock.c | 21 + > arch/arm/mach-imx/imx8/cpu.c | 544 > ++++++++++++++++ > arch/arm/mach-imx/imx8/iomux.c | 43 ++ > board/freescale/imx8qxp_mek/Kconfig | 14 + > board/freescale/imx8qxp_mek/MAINTAINERS | 6 + > board/freescale/imx8qxp_mek/Makefile | 7 + > board/freescale/imx8qxp_mek/README | 72 ++ > board/freescale/imx8qxp_mek/imx8qxp_mek.c | 152 +++++ > board/freescale/mx8mq_evk/README | 81 +++ > configs/imx8qxp_mek_defconfig | 38 ++ > drivers/clk/Kconfig | 1 + > drivers/clk/Makefile | 1 + > drivers/clk/imx/Kconfig | 6 + > drivers/clk/imx/Makefile | 5 + > drivers/clk/imx/clk-imx8.c | 212 ++++++ > drivers/gpio/mxc_gpio.c | 30 +- > drivers/misc/Makefile | 1 + > drivers/misc/imx8/Makefile | 3 + > drivers/misc/imx8/scu.c | 266 ++++++++ > drivers/misc/imx8/scu_api.c | 316 +++++++++ > drivers/mmc/fsl_esdhc.c | 30 +- > drivers/pinctrl/nxp/Kconfig | 18 + > drivers/pinctrl/nxp/Makefile | 2 + > drivers/pinctrl/nxp/pinctrl-imx.c | 209 +++--- > drivers/pinctrl/nxp/pinctrl-imx.h | 16 + > drivers/pinctrl/nxp/pinctrl-imx8.c | 40 ++ > drivers/pinctrl/nxp/pinctrl-scu.c | 66 ++ > drivers/power/domain/Kconfig | 8 +- > drivers/power/domain/Makefile | 1 + > drivers/power/domain/imx8-power-domain.c | 315 +++++++++ > drivers/serial/serial_lpuart.c | 126 +++- > include/configs/imx8qxp_mek.h | 156 +++++ > include/dt-bindings/clock/imx8qxp-clock.h | 583 > +++++++++++++++++ > include/dt-bindings/pinctrl/pads-imx8qxp.h | 757 > ++++++++++++++++++++++ > include/dt-bindings/soc/imx8_pd.h | 188 ++++++ > include/dt-bindings/soc/imx_rsrc.h | 557 > ++++++++++++++++ > include/fsl_lpuart.h | 2 +- > 67 files changed, 6399 insertions(+), 142 deletions(-) create mode 100644 > arch/arm/dts/fsl-imx8-ca35.dtsi create mode 100644 > arch/arm/dts/fsl-imx8dx.dtsi create mode 100644 > arch/arm/dts/fsl-imx8dxp.dtsi create mode 100644 > arch/arm/dts/fsl-imx8qxp-mek.dts create mode 100644 > arch/arm/dts/fsl-imx8qxp.dtsi create mode 100644 > arch/arm/include/asm/arch-imx8/clock.h > create mode 100644 arch/arm/include/asm/arch-imx8/gpio.h > create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h > create mode 100644 arch/arm/include/asm/arch-imx8/imx8-pins.h > create mode 100644 arch/arm/include/asm/arch-imx8/iomux.h > create mode 100644 arch/arm/include/asm/arch-imx8/power-domain.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/rpc.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/sci.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h > create mode 100644 arch/arm/include/asm/arch-imx8/sci/types.h > create mode 100644 arch/arm/include/asm/arch-imx8/sys_proto.h > create mode 100644 arch/arm/include/asm/armv8/cpu.h create mode > 100644 arch/arm/mach-imx/imx8/Kconfig create mode 100644 > arch/arm/mach-imx/imx8/Makefile create mode 100644 > arch/arm/mach-imx/imx8/clock.c create mode 100644 > arch/arm/mach-imx/imx8/cpu.c create mode 100644 > arch/arm/mach-imx/imx8/iomux.c create mode 100644 > board/freescale/imx8qxp_mek/Kconfig > create mode 100644 board/freescale/imx8qxp_mek/MAINTAINERS > create mode 100644 board/freescale/imx8qxp_mek/Makefile > create mode 100644 board/freescale/imx8qxp_mek/README > create mode 100644 board/freescale/imx8qxp_mek/imx8qxp_mek.c > create mode 100644 board/freescale/mx8mq_evk/README create mode > 100644 configs/imx8qxp_mek_defconfig create mode 100644 > drivers/clk/imx/Kconfig create mode 100644 drivers/clk/imx/Makefile > create mode 100644 drivers/clk/imx/clk-imx8.c create mode 100644 > drivers/misc/imx8/Makefile create mode 100644 drivers/misc/imx8/scu.c > create mode 100644 drivers/misc/imx8/scu_api.c create mode 100644 > drivers/pinctrl/nxp/pinctrl-imx8.c > create mode 100644 drivers/pinctrl/nxp/pinctrl-scu.c create mode 100644 > drivers/power/domain/imx8-power-domain.c > create mode 100644 include/configs/imx8qxp_mek.h create mode 100644 > include/dt-bindings/clock/imx8qxp-clock.h > create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h > create mode 100644 include/dt-bindings/soc/imx8_pd.h create mode > 100644 include/dt-bindings/soc/imx_rsrc.h > > -- > 2.14.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
