Hi Loic, On 03/10/2018 12:02, Loic Devulder wrote: > This adds platform code for the Khadas VIM2 board based on a > Meson GXM (S912) SoC with the Meson GXM configuration.
With the "ARM: meson: Extend mem_map to support 3GiB of RAM" patch, I'm glad this SoC will also be handled upstream, with the onboard SPI NOR flash to store U-boot, it's a very good candidate for a full EBBR experience ! Neil > > This initial submission supports UART, MMC/SDCard and Ethernet. > USB is partially supported. > > All the code is from Neil Armstrong! I just rebased the code, do > some cleanup and tested on my board. > > Loic Devulder (2): > ARM: meson: Add Khadas VIM2 board DT > ARM: meson: Add Khadas VIM2 board support > > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/meson-gxm-khadas-vim2.dts | 412 > ++++++++++++++++++++++++++++++++ > arch/arm/dts/meson-gxm.dtsi | 119 +++++++++ > arch/arm/mach-meson/Kconfig | 23 ++ > board/amlogic/khadas-vim2/Kconfig | 12 + > board/amlogic/khadas-vim2/MAINTAINERS | 6 + > board/amlogic/khadas-vim2/Makefile | 6 + > board/amlogic/khadas-vim2/README | 103 ++++++++ > board/amlogic/khadas-vim2/khadas-vim2.c | 62 +++++ > configs/khadas-vim2_defconfig | 51 ++++ > include/configs/khadas-vim2.h | 18 ++ > 11 files changed, 814 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/meson-gxm-khadas-vim2.dts > create mode 100644 arch/arm/dts/meson-gxm.dtsi > create mode 100644 board/amlogic/khadas-vim2/Kconfig > create mode 100644 board/amlogic/khadas-vim2/MAINTAINERS > create mode 100644 board/amlogic/khadas-vim2/Makefile > create mode 100644 board/amlogic/khadas-vim2/README > create mode 100644 board/amlogic/khadas-vim2/khadas-vim2.c > create mode 100644 configs/khadas-vim2_defconfig > create mode 100644 include/configs/khadas-vim2.h > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
