于 2018年10月1日 GMT+08:00 下午4:17:24, Maxime Ripard <maxime.rip...@bootlin.com> 写到:
>On Sat, Sep 29, 2018 at 04:45:53PM -0700, Vagrant Cascadian wrote:
>> From: Vasily Khoruzhick <anars...@gmail.com>
>>
>> Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
>> USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
>> bridge from Analogix.
>>
>> Signed-off-by: Icenowy Zheng <icen...@aosc.xyz>
>> Signed-off-by: Vasily Khoruzhick <anars...@gmail.com>
>>
>> Signed-off-by: Vagrant Cascadian <vagr...@debian.org>
>> ---
>>
>> arch/arm/dts/Makefile | 3 +-
>> arch/arm/dts/sun50i-a64-pinebook.dts | 99
>++++++++++++++++++++++++++++++++++++
>> configs/pinebook_defconfig | 32 ++++++++++++
>> 3 files changed, 133 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
>> create mode 100644 configs/pinebook_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 44ebc50bfa..1bb5d0d47e 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -403,7 +403,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \
>> sun50i-a64-orangepi-win.dtb \
>> sun50i-a64-pine64-plus.dtb \
>> sun50i-a64-pine64.dtb \
>> - sun50i-a64-sopine-baseboard.dtb
>> + sun50i-a64-sopine-baseboard.dtb \
>> + sun50i-a64-pinebook.dtb
>
>You should keep them sorted alphabetically.
>
>> dtb-$(CONFIG_MACH_SUN9I) += \
>> sun9i-a80-optimus.dtb \
>> sun9i-a80-cubieboard4.dtb \
>> diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts
>b/arch/arm/dts/sun50i-a64-pinebook.dts
>> new file mode 100644
>> index 0000000000..48bee4cc7f
>> --- /dev/null
>> +++ b/arch/arm/dts/sun50i-a64-pinebook.dts
>> @@ -0,0 +1,99 @@
>> +/*
>> + * Copyright (c) 2016 ARM Ltd.
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this
>dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This library is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>as
>> + * published by the Free Software Foundation; either version 2
>of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This library is distributed in the hope that it will be
>useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty
>of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated
>documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom
>the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall
>be
>> + * included in all copies or substantial portions of the
>Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
>KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
>WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/pwm/pwm.h>
>> +#include "sun50i-a64-pine64.dts"
>> +
>> +/ {
>> + model = "Pinebook";
>> + compatible = "pine64,pinebook", "allwinner,sun50i-a64";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + i2c0 = "/i2c@1f02400";
>> + };
>> +
>> + vdd_bl: regulator@0 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "bl-3v3";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
>> + enable-active-high;
>> + };
>> +
>> +
>> + backlight: backlight {
>> + compatible = "pwm-backlight";
>> + pwms = <&pwm 0 50000 0>;
>> + brightness-levels = <0 10 20 30 40 50 60 70 100>;
>> + default-brightness-level = <3>;
>> + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
>> + power-supply = <&vdd_bl>;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + memory {
>> + reg = <0x40000000 0x40000000>;
>> + };
>> +};
>> +
>> +&pwm {
>> + status = "okay";
>> +};
>> +
>> +&r_i2c {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&r_i2c_pins_a>;
>> + status = "okay";
>> + anx6345: edp-bridge@38 {
>> + compatible = "analogix,anx6345";
>> + reg = <0x38>;
>> + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
>> + status = "okay";
>> + };
>> +};
>
>I'm not sure why that DT is that different from the one we have in
>Linux. Ideally, they should be identical.
Linux one has no ANX6345 yet, so they're not identical.
>
>> diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
>> new file mode 100644
>> index 0000000000..15d0f50c41
>> --- /dev/null
>> +++ b/configs/pinebook_defconfig
>> @@ -0,0 +1,32 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_SUNXI=y
>> +CONFIG_SPL=y
>> +CONFIG_MACH_SUN50I=y
>> +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
>> +CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
>> +CONFIG_DRAM_CLK=552
>> +CONFIG_DRAM_ZQ=3881949
>> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
>> +CONFIG_R_I2C_ENABLE=y
>> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>> +# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
>> +CONFIG_CMD_POWEROFF=y
>
>So the way we deal with defconfigs usually is that we don't really
>enable a command solely for one defconfig. Either we enable it for all
>the boards, or none.
>
>> +# CONFIG_CMD_FLASH is not set
>> +# CONFIG_SPL_DOS_PARTITION is not set
>> +# CONFIG_SPL_EFI_PARTITION is not set
>> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
>> +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
>> +CONFIG_DM_I2C_GPIO=y
>
>Why are you using a bitbanged i2c bus? As far as I know, this is not
>enabled anywhere.
>
>> +# CONFIG_MMC_VERBOSE is not set
>
>This should go away
>
>> +CONFIG_DM_REGULATOR=y
>> +CONFIG_DM_REGULATOR_FIXED=y
>> +CONFIG_DM_PWM=y
>> +CONFIG_PWM_SUNXI=y
>> +CONFIG_USB_EHCI_HCD=y
>> +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
>> +# CONFIG_USB_GADGET is not set
>> +CONFIG_USB_HOST_ETHER=y
>> +CONFIG_USB_ETHER_ASIX=y
>
>Those last three too.
>
>Thanks!
>Maxime
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
