Use the proper CONFIG_TARGET_MPC832XEMDS Kconfig option to replace the
CONFIG_MPC832XEMDS ad-hoc config option.
Signed-off-by: Mario Six <mario....@gdsys.cc>
---
board/freescale/common/pq-mds-pib.c | 6 +++---
include/configs/MPC832XEMDS.h | 1 -
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/board/freescale/common/pq-mds-pib.c
b/board/freescale/common/pq-mds-pib.c
index d152a7821f..ae66039857 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -36,7 +36,7 @@ int pib_init(void)
i2c_write(0x26, 0x6, 1, &val8, 1);
val8 = 0x34;
i2c_write(0x26, 0x7, 1, &val8, 1);
-#if defined(CONFIG_MPC832XEMDS)
+#if defined(CONFIG_TARGET_MPC832XEMDS)
val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */
#else
val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */
@@ -55,7 +55,7 @@ int pib_init(void)
eieio();
-#if defined(CONFIG_MPC832XEMDS)
+#if defined(CONFIG_TARGET_MPC832XEMDS)
printf("PCI 32bit bus on PMC2 &PMC3\n");
#else
printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n");
@@ -76,7 +76,7 @@ int pib_init(void)
eieio();
printf("QOC3 ATM card on PMC0\n");
-#elif defined(CONFIG_MPC832XEMDS)
+#elif defined(CONFIG_TARGET_MPC832XEMDS)
val8 = 0;
i2c_write(0x26, 0x7, 1, &val8, 1);
val8 = 0xf7;
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index ff8692e9ca..a4047513d8 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -11,7 +11,6 @@
*/
#define CONFIG_E300 1 /* E300 family */
#define CONFIG_QE 1 /* Has QE */
-#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */
/*
* System Clock Setup
--
2.16.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
