On 21/09/2018 10:50, Lukasz Majewski wrote:
Hi Jean-Jacques,

Hi Marek,

I haven't heard of you on this series.

It is already a resend and has been tested on 2 platforms (zcu100 and
dra7/am57).

Can you please consider it for inclusion?
This is not Marek to blame for the delay - I had some non open source
tasks to finish (and I do apologise for this situation).
Thanks. I am not blaming anyone. I just wanted to make sure that this wasn't lost in limbo.


Your patches are now under build testing on travis-CI:
https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980

I will send the PR after CI finish.

Thanks,

JJ



On 04/09/2018 15:42, Jean-Jacques Hiblot wrote:
Resending this series after rebasing on top of latest u-boot.

This series aims at bringing improvements to the dwc3_generic
driver so that it can be used by most of the platforms using the
dwc3 controller.

I tested this on with DRA7 and AM57x platforms for both Peripheral
and Host operations. The code to enable DM USB host & dev support
for those platforms will be submitted in a separate series.

Michal Simek has tested this series:
" I have tested it on zcu100 with usb stick, usb to ethernet
converter and also dfu.
Tested-by: Michal Simek <michal.si...@xilinx.com>"

Enhancements:
- use separate Kconfig option for DM USB Periphal and DM USB Host.
This allow platforms to keep their non-DM USB peripheral code and
use the DM USB host.
- fixes the bind/probe confusion in dwc3_generic. The probe is done
when the USB device is first needed.
- handles PHYs when in the peripheral mode. The code to handle the
PHYs is shared with the host side
- handles clock and reset
- bind host controller to the more generic driver 'xhci-dwc3'


Changes in v2:
- Updated commit log
- Fixed typo in thordown.c
- select DM_USB_DEV by default for zynqmp platforms

Jean-Jacques Hiblot (7):
    usb: gadget: Do not call board_usb_xxx() directly in USB gadget
      drivers
    usb: introduce a separate config option for DM USB device
    usb: udc: implement DM versions of
      usb_gadget_initialize()/_release()/_handle_interrupt()
    dwc3_generic: do not probe the USB device driver when it's bound
    dwc3: move phy operation to core.c
    dwc3-generic: Handle the PHYs, the clocks and the reset lines
    dwc3-generic: Add select_dr_mode operation

   arch/arm/Kconfig                  |   2 +
   cmd/fastboot.c                    |   4 +-
   cmd/rockusb.c                     |   4 +-
   cmd/thordown.c                    |   4 +-
   cmd/usb_gadget_sdp.c              |   4 +-
   cmd/usb_mass_storage.c            |   4 +-
   common/dfu.c                      |   6 +-
   drivers/usb/Kconfig               |   6 ++
   drivers/usb/dwc3/Kconfig          |   7 +-
   drivers/usb/dwc3/core.c           |  86 +++++++++++++++-
   drivers/usb/dwc3/dwc3-generic.c   | 207
+++++++++++++++++++++++++++++---------
drivers/usb/dwc3/ep0.c            |   1 -
drivers/usb/gadget/ether.c        |  38 +------
drivers/usb/gadget/udc/udc-core.c |  44 +++++++-
drivers/usb/host/xhci-dwc3.c      |  93 ++---------------
include/dwc3-uboot.h              |   7 ++
include/linux/usb/gadget.h        |  18 ++++ 17 files changed, 351
insertions(+), 184 deletions(-)



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to