On Tue, Sep 18, 2018 at 8:16 AM Bin Meng <bmeng...@gmail.com> wrote:
>
> At present the response to ARP request is copied to the transmit
> packet buffer ('net_tx_packet') and sent out. This won't fail on
> most cases, but unfortunately is potentially broken under certain
> circumstances.
>
> For example, considering the following packet sequence:
>
> 1: placed an ARP request to the other end, initiated by 'ping'
> 2: received an ARP request from the other end
> 3: received the ARP reply from the other end
>
> The ICMP echo request packet was created in step #1, stored in the
> transmit packet buffer, but was corrupted in step #2 when handling
> the response to ARP request using the same buffer, and finally the
> same buffer was sent out in step #3 as the follow-up on ARP reply.
> This leads to 'ping' timeout since the ICMP echo request was never
> sent out to the other end, instead a duplicated ARP reply packet
> was sent out and ignored by the other end.
>
> Similar corruption can happen with other protocols like TFTP, which
> leads to TFTP transfer timeout.
>
> Use the dedicated ARP transmit packet buffer ('arp_tx_packet') to
> avoid such issue.
>
> Signed-off-by: Bin Meng <bmeng...@gmail.com>https://patchwork.ozlabs.org/patch/948865/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
