The loop in ahci_start_ports() is looping over the maximum number of
SCSI devices in the system, which can be larger than the amount of ports
a particular AHCI controller has. The extra looping isn't directly
harmful because the link_port_map bitmap won't have the bit set for a
nonexistent port, but it is wasteful. Replace the loop limit with the
port count of the AHCI controller instead.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkky...@iki.fi>
---
drivers/ata/ahci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c35912bd33..333f0457f6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -980,7 +980,7 @@ static int ahci_start_ports(struct ahci_uc_priv *uc_priv)
linkmap = uc_priv->link_port_map;
- for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+ for (i = 0; i < uc_priv->n_ports; i++) {
if (((linkmap >> i) & 0x01)) {
if (ahci_port_start(uc_priv, (u8) i)) {
printf("Can not start port %d\n", i);
--
2.16.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
