On Mon, 2018-09-10 at 20:06 +0200, Simon Goldschmidt wrote: > On 10.09.2018 19:28, Dalon Westergreen wrote: > This patch set adds a possible hex output of the > u-boot-spl elf and enables said output for the > Intel Stratix10 device. Stratix10 requires a hex > output of the elf for creating the secure device manager > configuration bitstream. > > I don't use Stratix10 but Cyclone5, but as I need a .hex to boot from > FPGA, I want to know how to solve this best. > > So to understand this, again a question: is this the only way to boot > Stratix10? Or one of the possible boot methods? > Because reading "Intel® Stratix® 10 SoC FPGA Boot User Guide", it seems > like you would need the hex for "FPGA Configuration First Mode", but not > for "HPS Boot First Mode"?
Stratix 10 always requires this for boot. The configuration method in s10 is very different. The SDM, which is a security processor, copies the u-boot-spl data to the S10 HPS onchip memory. After this is done, the SDM releases the hps from reset. This is regardless of the HPS boot media, which could be SDMMC, etc, etc. > > If so, it would make Stratix10 and Cyclone5 more alike and a > configuration option (like "Boot from FPGA") could be used to control > CONFIG_OF_EMBED and enable creating the hex file for SPL. I looked into how i could enable CONFIG_OF_EMBED only for the SPL build and found no easy way. It was suggested to add something like CONFIG_SPL_OF_EMBED but it still seemed this would require touching a bunch of code. In the end, i really see no reason in socfpga to have the devicetree separated from u-boot / spl. > > I *am* working on fixing the "boot from FPGA" case for Cyclone5, so I'd > appreaciate it if we could share as much as possible between those > sub-architectures. > What difficulties are you having? > > Simon > > > Dalon Westergreen (3): > common: add spl/u-boot-spl.hex target > arm: socfpga: stratix10: add CONFIG_SPL_TARGET > arm; socfpga: stratix10: Add CONFIG_OF_EMBED > > Makefile | 5 +++++ > configs/socfpga_stratix10_defconfig | 1 + > include/configs/socfpga_stratix10_socdk.h | 3 ++- > 3 files changed, 8 insertions(+), 1 deletion(-) > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
