> Horst: Give me step-by-step manual how to reach that fault.
Hi Michal,
in 'include/configs/microblaze_generic.h' is ipaddr defined:
#define CONFIG_IPADDR 192.168.0.3
Now run uboot:
setenv ipaddr 192.168.0.1
saveenv
Reboot the board
printenv (tells ipaddr 192.168.0.1)
bdinfo (tells ipaddr 192.168.0.3)
tftpboot also use ipaddr 192.168.0.3
On a ppc-based board bdinfo tells 192.168.0.1
So I found the difference in the order of the two functions in
lib_microblaze/board.c board_init():
env_relocate() (ppc-order witch works)
getenv_IPaddr()
instead of:
getenv_IPaddr() (microblaze-order)
env_relocate()
Best regards
Horst
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
