On Thu, 2018-09-06 at 12:09 +0200, Marek Vasut wrote: > On 09/06/2018 05:02 AM, Dalon Westergreen wrote: > Stratix10 requires a hex image of the spl for boot. The heximage is added to > the FPGA configuration image and loaded tothe processor memory by the > configuration engine. > v2: -> add CONFIG_OF_EMBED to include dtb in elf -> generate hex from elf > source > Signed-off-by: Dalon Westergreen <dwest...@gmail.com>--- > configs/socfpga_stratix10_defconfig | 1 + > scripts/Makefile.spl | 6 ++++++ 2 files changed, 7 > insertions(+) > diff --git a/configs/socfpga_stratix10_defconfig > b/configs/socfpga_stratix10_defconfigindex dceadff439..17cc732cbe 100644--- > a/configs/socfpga_stratix10_defconfig+++ > b/configs/socfpga_stratix10_defconfig@@ -56,3 +56,4 @@ CONFIG_DM_USB=y > CONFIG_USB_DWC2=y CONFIG_USB_STORAGE=y > CONFIG_USE_TINY_PRINTF=y+CONFIG_OF_EMBED=y > Why is this needed ? And where did the objcopy hack go ? What is > theexplanation here ?
You suggested the use of CONFIG_OF_EMBED as an alternative to using the u-boot- spl-dtb.bin for objcopy. The intent is to ensure that the spl elf has the dtb included, and then a simple objcopy to elf to hex is fine.You no longer need the --change-address as the elf indicates the correct start address, unlike the binary. > diff --git a/scripts/Makefile.spl b/scripts/Makefile.splindex > 76d08fd92b..b09bd40b2a 100644--- a/scripts/Makefile.spl+++ > b/scripts/Makefile.spl@@ -190,6 +190,7 @@ endif ifdef CONFIG_ARCH_SOCFPGA ALL- > $(CONFIG_TARGET_SOCFPGA_GEN5) += $(obj)/$(SPL_BIN).sfp ALL- > $(CONFIG_TARGET_SOCFPGA_ARRIA10) += $(obj)/$(SPL_BIN).sfp+ALL- > $(CONFIG_TARGET_SOCFPGA_STRATIX10) += $(obj)/$(SPL_BIN).hex > CONFIG_SPL_TARGET "u-boot-spl.hex" can replace this addition I think ? > endif ifdef CONFIG_ARCH_SUNXI@@ -299,6 +300,11 @@ OBJCOPYFLAGS_u-boot-x86- > 16bit-spl.bin := -O binary -j .start16 -j .resetvec $(obj)/u-boot-x86-16bit- > spl.bin: $(obj)/u-boot-spl FORCE $(call if_changed,objcopy) > +OBJCOPYFLAGS_$(SPL_BIN).hex = -O ihex++$(obj)/$(SPL_BIN).hex: > $(obj)/$(SPL_BIN) FORCE+ $(call if_changed,objcopy)+ > This is generic, separate patch please. > LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) Will do > # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
