Hi Stefano, > >> a new PR. I dropped the patches causing breakages on PowerPC boards, as > >> well as the issue on GE boards. It ran on travis successfully. > >> > >> > >> The following changes since commit > >> 11ed312896c5f5814064c5d45dcb2f53dc121437: > >> > >> configs: am57xx: change default board name to beagle_x15 (2018-08-26 > >> 12:26:16 -0400) > >> > >> are available in the Git repository at: > >> > >> git://www.denx.de/git/u-boot-imx.git master > >> > >> for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555: > >> > >> mx7dsabresd: Add the qspi target to the list of supported defconfigs > >> (2018-09-04 08:47:23 +0200) > >> > >> ---------------------------------------------------------------- > >> Alex Kiernan (1): > >> Cleanup CONFIG_BOOTDELAY on cl-som-imx7 > >> > >> Anson Huang (3): > >> imx: mx7: psci: improve cpu hotplug flow > >> imx: mx7: add gpc initialization for low power mode > >> imx: mx7: add system suspend/resume support > >> > >> Fabio Estevam (1): > >> mx7dsabresd: Add the qspi target to the list of supported defconfigs > >> > >> Martin Kaiser (1): > >> watchdog: mx25: use the imx_watchdog driver for mx25 > >> > >> Stefan Agner (2): > >> board: toradex: common: fail gracefully on missing NAND chip > >> colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support > >> > >> Stefano Babic (1): > >> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig > >> > >> Ye Li (6): > >> imx: imx6sx-sdb: Enable DM QSPI driver > >> imx: imx6sx-sabreauto: convert to use DM QSPI driver > >> imx: imx7d-sdb: Add DM QSPI support > >> dts: imx6ul: Update alias to support DM > >> dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards > >> imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot > > > > Are you aware of any issues on some imx6 devices in 2018.09? > > No. > > > The > > hummingboard2 (imx6q) hangs for me just after the output below, even > > with the above PR, it works fine with a imx6sx device (udoo neo). I'm > > sure I've seen something on the list that might be related but I can't > > find it. > > :-( > > > > > Sorry for picking this up so late in the cycle. > > I can just try to test on another mx6q boar if I get enough time, but of > course this is not a great test.
It seems like the Wandboard Quad revB I have also works fine so It might just be a regression in the mx6cuboxi target. P _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
