-----Original Message----- From: York Sun Sent: 2018年8月15日 22:58 To: Yinbo Zhu <yinbo....@nxp.com>; Y.b. Lu <yangbo...@nxp.com>; u-boot@lists.denx.de Cc: Xiaobo Xie <xiaobo....@nxp.com>; Andy Tang <andy.t...@nxp.com>; Peng Ma <peng...@nxp.com> Subject: Re: [PATCH v6 1/8] dm: mmc: use block layer in mmc driver
First of all, your subject is wrong. You are not making any change to dm or mmc. On 08/13/2018 12:09 AM, Yinbo Zhu wrote: > At present the MMC subsystem maintains its own list of MMC devices. > This cannot work with driver model when CONFIG_BLK is enabled, use > blk_dread to replace previous mmc read interface, use mmc_get_blk_desc > to get the mmc device property > > Signed-off-by: Yinbo Zhu <yinbo....@nxp.com> > --- > Change in v6: > remove block layer in mmc_legacy. > > arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 5 ++--- >You didn't replace all. If you compiled all targets, you would see errors on >secure boot targets. Please fix >and test _ALL_ targets before sending another version. >York Hi York, I had tested all targets, for 1088 sd secure boot, upstream code has a original issue, need upstream to cover it other targets that I had tested okay, I will send it to upstream as v7 version. Thanks, Best Regards, Yinbo Zhu. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
