On 08/21/2018 11:47 PM, Praneeth Bajjuri wrote:
> beagleboard x15 is the first supported platform variant of am57xx
> in AOSP (android open source project) now.
>
> changing board name to stay in consistent with aosp target name.
>
> Signed-off-by: Praneeth Bajjuri <prane...@ti.com>
> ---
> configs/am57xx_evm_defconfig | 2 +-
> configs/am57xx_hs_evm_defconfig | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
> index 1572dc80db03..07ab01e921bf 100644
> --- a/configs/am57xx_evm_defconfig
> +++ b/configs/am57xx_evm_defconfig
> @@ -14,7 +14,7 @@ CONFIG_NR_DRAM_BANKS=2
> CONFIG_SPL_LOAD_FIT=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_USE_BOOTARGS=y
> -CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200
> androidboot.console=ttyS2 androidboot.hardware=am57xevmboard"
> +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200
> androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
The issue will now be unless we rename the RC files in our offering for
AM57x EVM, then it will not boot correctly. We can/should ideally ship
both sets of RC files (they are the same now, but different HW may need
different RC files).
I propose we do some U-Boot scripting and set this boot variable based
on runtime board detection in U-Boot. Right after we set fdt_file, we
can also set android_hardware, then we can replace the above with:
androidboot.hardware=${android_hardware}"
Andrew
> # CONFIG_USE_BOOTCOMMAND is not set
> CONFIG_SYS_CONSOLE_INFO_QUIET=y
> # CONFIG_MISC_INIT_R is not set
> diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
> index 895719286dc5..0522c10b01c4 100644
> --- a/configs/am57xx_hs_evm_defconfig
> +++ b/configs/am57xx_hs_evm_defconfig
> @@ -20,7 +20,7 @@ CONFIG_SPL_LOAD_FIT=y
> CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_USE_BOOTARGS=y
> -CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200
> androidboot.console=ttyS2 androidboot.hardware=am57xevmboard"
> +CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200
> androidboot.console=ttyS2 androidboot.hardware=beagle_x15board"
> # CONFIG_USE_BOOTCOMMAND is not set
> CONFIG_SYS_CONSOLE_INFO_QUIET=y
> # CONFIG_MISC_INIT_R is not set
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
