On 16/08/2018 10:15, Beniamino Galvani wrote: > On Mon, Aug 06, 2018 at 02:49:19PM +0200, Neil Armstrong wrote: >> The Amlogic Meson SoCs embeds a specific Power Domain dedicated to the >> Video Processing Unit. >> This patch implements support for this power domain in preparation of the >> future support for the Video display support in U-Boot. >> >> This driver will depend on changes in the clock driver to handle the setup >> of the VPU and VAPB clocks configured from DT using assigned-clocks entries. >> >> Reviewed-by: Simon Glass <s...@chromium.org> >> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com> >> --- >> drivers/power/domain/Kconfig | 7 ++ >> drivers/power/domain/Makefile | 1 + >> drivers/power/domain/meson-gx-pwrc-vpu.c | 198 >> +++++++++++++++++++++++++++++++ >> 3 files changed, 206 insertions(+) >> create mode 100644 drivers/power/domain/meson-gx-pwrc-vpu.c >> >> diff --git a/drivers/power/domain/Kconfig b/drivers/power/domain/Kconfig >> index 7cfa761..4618847 100644 >> --- a/drivers/power/domain/Kconfig >> +++ b/drivers/power/domain/Kconfig >> @@ -16,6 +16,13 @@ config BCM6328_POWER_DOMAIN >> Enable support for manipulating BCM6345 power domains via MMIO >> mapped registers. >> >> +config MESON_GX_VPU_POWER_DOMAIN >> + bool "Enable Amlogic Meson GX VPU power domain driver" >> + depends on ARCH_MESON > > Hi, > > since the driver uses syscon_node_to_regmap() I think the Kconfig > entry should also 'select SYSCON'.
Exact > > Beniamino > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
