On Wed, Aug 15, 2018 at 3:22 AM, Alan Beard <bear...@unixservice.com.au> wrote: > Hi Maxine and team, > > I want to run Fedora linux, from here: > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp > /images/ > > on the Banana Pi BPI-M2 Berry. (works fine on a Banana Pi original) > > I've waited six months for the patches to filter through to the Fedora team > but, so far nothing. > > I've downloaded the code from the denx.de website but I cannot see a way to > just generate the u-boot-sunxi-with-spl.bin file for the Berry. > There is a u-boot-sunxi-with-spl.bin file in the Fedora distribution for > the Berry but it doesn't work. > This also doesn't work: > https://github.com/BPI-SINOVOIP/BPI-Mainline-uboot.git > I suspect they check the chip-id and barf if it's not 0x1701 the R40. > > I chose the Banana Pi BPI-M2 Berry over the Ultra because I didn't need > the extra ram or other bells and whistles. I want to embed a BPi Berry in > an amateur radio project where I need a board with a SATA port for an SSD.
I'm not clear what exactly you are asking? u-boot-sunxi-with-spl.bin is by default created with u-boot build and SATA support is enabled recently on commit: dddc4b4af3a444ef78d1a3d983aae71179a0d92c _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
