Detect the SD/eMMC boot device at run-time. Load the environment from
the boot deice, as well as save to it.

Leave the environment offset the same as in the SPI flash.

Make SD/eMMC 0 the default environment device when the boot device is
not detected.

Cc: Konstantin Porotchkin <kos...@marvell.com>
Signed-off-by: Baruch Siach <bar...@tkos.co.il>
---
 arch/arm/mach-mvebu/armada8k/cpu.c | 24 ++++++++++++++++++++++++
 include/configs/mvebu_armada-8k.h  |  3 +++
 2 files changed, 27 insertions(+)

diff --git a/arch/arm/mach-mvebu/armada8k/cpu.c 
b/arch/arm/mach-mvebu/armada8k/cpu.c
index f8e8e73610d2..959a7cff7641 100644
--- a/arch/arm/mach-mvebu/armada8k/cpu.c
+++ b/arch/arm/mach-mvebu/armada8k/cpu.c
@@ -18,6 +18,10 @@
 #define RFU_GLOBAL_SW_RST              (MVEBU_RFU_BASE + 0x84)
 #define RFU_SW_RESET_OFFSET            0
 
+#define SAR0_REG                       (MVEBU_REGISTER(0x2400200))
+#define BOOT_MODE_MASK                 0x3f
+#define BOOT_MODE_OFFSET               4
+
 /*
  * The following table includes all memory regions for Armada 7k and
  * 8k SoCs. The Armada 7k is missing the CP110 slave regions here. Lets
@@ -125,3 +129,23 @@ u32 mvebu_get_nand_clock(void)
        else
                return 250 * 1000000;
 }
+
+int mmc_get_env_dev(void)
+{
+       u32 reg;
+       unsigned int boot_mode;
+
+       reg = readl(SAR0_REG);
+       boot_mode = (reg >> BOOT_MODE_OFFSET) & BOOT_MODE_MASK;
+
+       switch (boot_mode) {
+       case 0x28:
+       case 0x2a:
+               return 0;
+       case 0x29:
+       case 0x2b:
+               return 1;
+       }
+
+       return CONFIG_SYS_MMC_ENV_DEV;
+}
diff --git a/include/configs/mvebu_armada-8k.h 
b/include/configs/mvebu_armada-8k.h
index 9205bd9632c3..b84ce670e8b3 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -66,6 +66,9 @@
 #define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
+/* When runtime detection fails this is the default */
+#define CONFIG_SYS_MMC_ENV_DEV         0
+
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_MAX_CHIPS      1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-- 
2.18.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to