The MicroCrystal RV3029 driver didn't have a Kconfig entry and was not used anywhere. Add it to Kconfig to make it selectable.
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> Tested-by: Klaus Goger <klaus.go...@theobroma-systems.com> --- drivers/rtc/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 5436509..8a6e796 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -42,6 +42,16 @@ config RTC_ISL1208 This driver supports reading and writing the RTC/calendar and detects total power failures. +config RTC_RV3029 + bool "Enable RV3029 driver" + depends on DM_RTC + help + The MicroCrystal RV3029 is a I2C Real Time Clock (RTC) with 8-byte + battery-backed SRAM. + + This driver supports reading and writing the RTC/calendar and the + battery-baced SRAM section. + config RTC_RX8010SJ bool "Enable RX8010SJ driver" depends on DM_RTC -- 2.1.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot