> -----Original Message-----
> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Pramod
> Kumar
> Sent: Tuesday, August 7, 2018 12:52 PM
> To: u-boot@lists.denx.de
> Cc: Pramod Kumar <pramod.kuma...@nxp.com>
> Subject: [U-Boot] [PATCH] ls1088ardb_pb: Add support for ls1088ardb_pb
> board.
>
> ls1088ardb-pb is another varinat of the ls1088ardb.
> This board support two m.2 x2 gen 3 pcie card slot.
> There is no support of sata,pcie standard slot, miniPCIE slot and TDM in this
> board
>
Please put space after ","
> Signed-off-by: Pramod Kumar <pramod.kuma...@nxp.com>
> ---
> arch/arm/Kconfig | 14 +++
> arch/arm/cpu/armv8/Kconfig | 1 +
> board/freescale/ls1088a/Kconfig | 43 +++++++++
> board/freescale/ls1088a/MAINTAINERS | 8 ++
> board/freescale/ls1088a/Makefile | 1 +
> board/freescale/ls1088a/ddr.h | 4 +-
> board/freescale/ls1088a/ls1088a.c | 13 ++-
> ... ls1088ardb_pb_qspi_SECURE_BOOT_defconfig} | 2 +- ...defconfig =>
> ls1088ardb_pb_qspi_defconfig} | 2 +-
> ...ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig} | 2 +- ...ig =>
> ls1088ardb_pb_sdcard_qspi_defconfig} | 2 +-
> include/configs/ls1088ardb_pb.h | 87 +++++++++++++++++++
> 12 files changed, 172 insertions(+), 7 deletions(-) copy
> configs/{ls1088ardb_qspi_SECURE_BOOT_defconfig =>
> ls1088ardb_pb_qspi_SECURE_BOOT_defconfig} (97%) copy
> configs/{ls1088ardb_qspi_defconfig => ls1088ardb_pb_qspi_defconfig}
> (97%) copy configs/{ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig =>
> ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig} (98%) copy
> configs/{ls1088ardb_sdcard_qspi_defconfig =>
> ls1088ardb_pb_sdcard_qspi_defconfig} (98%) create mode 100644
> include/configs/ls1088ardb_pb.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index
> a047552ed3..10fb7149cb 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1120,6 +1120,20 @@ config TARGET_LS1088ARDB
> development platform that supports the QorIQ LS1088A
> Layerscape Architecture processor.
>
> +config TARGET_LS1088ARDB_PB
> + bool "Support ls1088ardb_pb"
> + select ARCH_LS1088A
> + select ARM64
> + select ARMV8_MULTIENTRY
> + select ARCH_MISC_INIT
> + select BOARD_LATE_INIT
> + select SUPPORT_SPL
> + help
> + Support for NXP LS1088ARDB_PB platform.
> + The LS1088A Reference design board (RDB_PB) is a high-
> performance
> + development platform that supports the QorIQ LS1088A
> + Layerscape Architecture processor.
> +
> config TARGET_LS1021AQDS
> bool "Support ls1021aqds"
> select ARCH_LS1021A
> diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
> index c8bebabdf6..8ede276b65 100644
> --- a/arch/arm/cpu/armv8/Kconfig
> +++ b/arch/arm/cpu/armv8/Kconfig
> @@ -100,6 +100,7 @@ config PSCI_RESET
> !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
> !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
> !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
> + !TARGET_LS1088ARDB_PB && \
> !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
> !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
> !TARGET_LS1012AFRWY && \
> diff --git a/board/freescale/ls1088a/Kconfig
> b/board/freescale/ls1088a/Kconfig index 8bb828e3fd..9f20d7247f 100644
> --- a/board/freescale/ls1088a/Kconfig
> +++ b/board/freescale/ls1088a/Kconfig
> @@ -59,3 +59,46 @@ endif
>
> source "board/freescale/common/Kconfig"
> endif
> +
> +if TARGET_LS1088ARDB_PB
> +
> +config SYS_BOARD
> + default "ls1088a"
> +
> +config SYS_VENDOR
> + default "freescale"
> +
> +config SYS_SOC
> + default "fsl-layerscape"
> +
> +config SYS_CONFIG_NAME
> + default "ls1088ardb_pb"
> +
> +if SYS_LS_PPA_FW_IN_XIP
> +
> +config SYS_LS_PPA_FW_ADDR
> + hex "PPA Firmware Addr"
> + default 0x20400000
> +
> +if CHAIN_OF_TRUST
> +config SYS_LS_PPA_ESBC_ADDR
> + hex "PPA Firmware HDR Addr"
> + default 0x20680000
> +endif
> +endif
> +
> +if (SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND)
> +
> +config SYS_LS_PPA_FW_ADDR
> + hex "PPA Firmware Addr"
> + default 0x400000
> +
> +if CHAIN_OF_TRUST
> +config SYS_LS_PPA_ESBC_ADDR
> + hex "PPA Firmware HDR Addr"
> + default 0x680000
> +endif
> +endif
> +
> +source "board/freescale/common/Kconfig"
> +endif
> diff --git a/board/freescale/ls1088a/MAINTAINERS
> b/board/freescale/ls1088a/MAINTAINERS
> index 4d804d9447..a7cd4fe277 100644
> --- a/board/freescale/ls1088a/MAINTAINERS
> +++ b/board/freescale/ls1088a/MAINTAINERS
> @@ -7,6 +7,14 @@ F: include/configs/ls1088ardb.h
> F: configs/ls1088ardb_qspi_defconfig
> F: configs/ls1088ardb_sdcard_qspi_defconfig
>
> +LS1088ARDB_PB BOARD
> +M: Pramod Kumar <pramod.ku...@nxp.com>
> +S: Maintained
> +F: board/freescale/ls1088a/
> +F: include/configs/ls1088ardb_pb.h
> +F: configs/ls1088ardb_pb_qspi_defconfig
> +F: configs/ls1088ardb_pb_sdcard_qspi_defconfig
> +
> LS1088AQDS BOARD
> M: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
> M: Ashish Kumar <ashish.ku...@nxp.com>
> diff --git a/board/freescale/ls1088a/Makefile
> b/board/freescale/ls1088a/Makefile
> index c2b0e7dc0f..dd5f365378 100644
> --- a/board/freescale/ls1088a/Makefile
> +++ b/board/freescale/ls1088a/Makefile
> @@ -6,5 +6,6 @@ obj-y += ls1088a.o
> obj-y += ddr.o
> ifndef CONFIG_SPL_BUILD
> obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
> +obj-$(CONFIG_TARGET_LS1088ARDB_PB) += eth_ls1088ardb.o
> obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o endif diff --git
> a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h index
> b35c4ae2da..07f5f55e2e 100644
> --- a/board/freescale/ls1088a/ddr.h
> +++ b/board/freescale/ls1088a/ddr.h
> @@ -1,6 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> - * Copyright 2017 NXP
> + * Copyright 2018 NXP
2017-2018
> */
>
> #ifndef __LS1088A_DDR_H__
> @@ -27,7 +27,7 @@ static const struct board_specific_parameters udimm0[]
> = {
> * num| hi| rank| clk| wrlvl | wrlvl | wrlvl
> * ranks| mhz| GB |adjst| start | ctl2 | ctl3
> */
> -#if defined(CONFIG_TARGET_LS1088ARDB)
> +#if defined(CONFIG_TARGET_LS1088ARDB) ||
> +defined(CONFIG_TARGET_LS1088ARDB_PB)
>
> {2, 1666, 0, 8, 8, 0x090A0B0E, 0x0F10110D,},
> {2, 1900, 0, 8, 9, 0x0A0B0C10, 0x1112140E,},
> diff --git a/board/freescale/ls1088a/ls1088a.c
> b/board/freescale/ls1088a/ls1088a.c
> index a0dab6fc2e..7dda7921df 100644
> --- a/board/freescale/ls1088a/ls1088a.c
> +++ b/board/freescale/ls1088a/ls1088a.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * Copyright 2017 NXP
> + * Copyright 2018 NXP
2017-2018
--pk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
