It was noticed, that the erase command (mtd erase spi-nand0) aborts upon
the first bad block. With this change, bad blocks are now skipped and
the erase operation will continue.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Miquel Raynal <miquel.ray...@bootlin.com>
Cc: Boris Brezillon <boris.brezil...@bootlin.com>
Cc: Jagan Teki <ja...@openedev.com>
---
drivers/mtd/nand/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
index 0b793695cc..888f765b90 100644
--- a/drivers/mtd/nand/core.c
+++ b/drivers/mtd/nand/core.c
@@ -162,7 +162,7 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct
erase_info *einfo)
nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last);
while (nanddev_pos_cmp(&pos, &last) <= 0) {
ret = nanddev_erase(nand, &pos);
- if (ret) {
+ if (ret && ret != -EIO) {
einfo->fail_addr = nanddev_pos_to_offs(nand, &pos);
return ret;
--
2.18.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
