There were some NULL pointers dereferenced because DM was used
too early without correct initialization.
This fixes commit 73172753f4f3 ("ARM: socfpga: Convert to DM serial")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
---
arch/arm/mach-socfpga/spl_gen5.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-socfpga/spl_gen5.c b/arch/arm/mach-socfpga/spl_gen5.c
index d6fe7d35af..0d5526656d 100644
--- a/arch/arm/mach-socfpga/spl_gen5.c
+++ b/arch/arm/mach-socfpga/spl_gen5.c
@@ -86,6 +86,7 @@ void board_init_f(ulong dummy)
const struct cm_config *cm_default_cfg = cm_get_default_config();
unsigned long sdram_size;
unsigned long reg;
+ int ret;
/*
* First C code to run. Clear fake OCRAM ECC first as SBE
@@ -152,6 +153,12 @@ void board_init_f(ulong dummy)
/* unfreeze / thaw all IO banks */
sys_mgr_frzctrl_thaw_req();
+ ret = spl_early_init();
+ if (ret) {
+ debug("spl_early_init() failed: %d\n", ret);
+ hang();
+ }
+
/* enable console uart printing */
preloader_console_init();
@@ -177,7 +184,4 @@ void board_init_f(ulong dummy)
}
socfpga_bridges_reset(1);
-
- /* Configure simple malloc base pointer into RAM. */
- gd->malloc_base = CONFIG_SYS_TEXT_BASE + (1024 * 1024);
}
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
