>
> Hi, everyone.
>
> I have got a problem when I porting U-BOOT to my board
>
> with MPC8247. My configuration file is based on the MPC8260ADS_config.
>
> The problem is : The instruction in TEXT section can not load data in
>
> other (DATA) sections. It seems there is a relocation to the data section .
>
> For example: If I use
>
> for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
> if ((*init_fnc_ptr) () != 0) {
> hang ();
> }
> }
>
> I can't jump to functions in init_sequence[] ;
>
> If I called functions such as get_clocks() in board_init_f , it works
> fine.
>
> So the code in board_init_f can not load address in init_sequence[] , because
>
> init_sequence[] is out of TEXT section.
>
> The same thing happens with iop_conf_tab[][], and strings used by "puts".
>
> Anyone there has the same problem? Or know the point? Pls help!
Yes, that is a relocation problem. Do you compile with -mrelocatable?
If so, you might have a broken toolchain that don't produce .fixups
jocke
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
