Hi, I've been trying to get an SD card working with an at91sam9g45ek-es board. I read a couple of threads in the archive and ended up doing this:
I applied these patches: http://lists.denx.de/pipermail/u-boot/2009-August/059595.html http://lists.denx.de/pipermail/u-boot/2009-September/060053.html http://lists.denx.de/pipermail/u-boot/2009-September/060243.html Added these #define's to include/configs/at91sam9m10g45ek.h: #define CONFIG_CMD_EXT2 1 #define CONFIG_CMD_FAT 1 #define CONFIG_CMD_MMC 1 #define CONFIG_MMC 1 #define CONFIG_ATMEL_MCI 1 Finally, I added this to the board init function: #ifdef CONFIG_ATMEL_MCI at91_mci0_hw_init(0, 4); #endif When I try it out this is what I get: U-Boot> mmc init 0 mmc: clock 150000 too low; setting CLKDIV to 255 mmc: command 1 failed (status: 0x0c100025) No MMC card found Am I doing something wrong? Any help is appreciated, Henry
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
