On Mon, Jul 30, 2018 at 8:15 AM, Pankaj Bansal <pankaj.ban...@nxp.com> wrote: > Till now we have had cases where we had one phy device per dpmac. > Now, with the upcoming products (LX2160AQDS), we have cases, where there > are sometimes two phy devices for one dpmac. One phy for TX lanes and > one phy for RX lanes. to handle such cases, add the support for multiple > phys in ethernet driver. The ethernet link is up if all the phy devices > connected to one dpmac report link up. also the link capabilities are > limited by the weakest phy device. > > i.e. say if there are two phys for one dpmac. one operates at 10G without > autoneg and other operate at 1G with autoneg. Then the ethernet interface > will operate at 1G without autoneg. > > Signed-off-by: Pankaj Bansal <pankaj.ban...@nxp.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
