Usually PHYADDR is used while PHYLIB is defined, but
boards like apx4devkit, mx6qarm2 are not using PHYLIB
but they are using CONFIG_FEC_MXC_PHYADDR.

So, future patches will convert CONFIG_FEC_MXC_PHYADDR to
generic CONFIG_PHY_ADDR and that will depends on PHYLIB.
Handle this special case for this boards by adding default
CONFIG_FEC_MXC_PHYADDR to 0 if not defined so-that it can't
depends on PHYLIB local to fec_mxc. Boards which are using
PHY_ADDR in future will anyway use PHYLIB.

Cc: Ye Li <ye...@nxp.com>
Cc: Jason Liu <jason.hui....@nxp.com>
Cc: Lauri Hintsala <lauri.hints...@bluegiga.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
 drivers/net/fec_mxc.c        | 4 ++++
 include/configs/apx4devkit.h | 1 -
 include/configs/mx6qarm2.h   | 1 -
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index fc42978a20..49bb926efa 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -50,6 +50,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CONFIG_FEC_XCV_TYPE    PHY_INTERFACE_MODE_MII100
 #endif
 
+#if defined(CONFIG_TARGET_APX4DEVKIT) || defined(CONFIG_TARGET_MX6QARM2)
+# define CONFIG_FEC_MXC_PHY_ADDR       0
+#endif
+
 /*
  * The i.MX28 operates with packets in big endian. We need to swap them before
  * sending and after receiving.
diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index 475f9c372f..aa129edc89 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -52,7 +52,6 @@
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_ETHPRIME                        "FEC"
-#define CONFIG_FEC_MXC_PHYADDR         0
 #define IMX_FEC_BASE                   MXS_ENET0_BASE
 #endif
 
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index b82b8325ff..06043c888f 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -22,7 +22,6 @@
 
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define        CONFIG_FEC_XCV_TYPE             PHY_INTERFACE_MODE_RGMII
-#define CONFIG_FEC_MXC_PHYADDR         0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
-- 
2.18.0.321.gffc6fa0e3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to