Tom, The following changes since commit 08fcdd332f3d6bc7842e21a97c80789d9233e147:
Makefile: Fix 'clean' target (2018-07-26 07:12:31 -0400) are available in the git repository at: git://git.denx.de/u-boot-fsl-qoriq.git for you to fetch changes up to 86b840b78d0eba652f65841a870d232ab743612e: drivers/ddr/fsl: fix '__hwconfig without a buffer' messages (2018-07-26 11:54:00 -0700) Travis build log is here https://travis-ci.org/yorksun/u-boot/builds/408648511. I see one compiling warning caused by recent commit 68c7025d99db. ---------------------------------------------------------------- Alison Wang (1): armv8: ls2080ardb: update copyright claim Ashish Kumar (2): configs: Disable 4k erase sector size for spansion "s25fs512s" flash armv8: ls2088ardb: Move CONFIG_SPI_FLASH, CONFIG_SPI_FLASH_SPANSION to defconfig Jagdish Gediya (1): armv8: ls1088a: change dpl load command from apply to lazyapply Jeremy Gebben (1): drivers/ddr/fsl: fix '__hwconfig without a buffer' messages Vinitha V Pillai (2): LS1043ARBD: Fix SD Boot issue with PPA LS1088ARDB: Secure Boot:Change load address of dpl header in SD York Sun (8): armv8: ls1046ardb: ls1046aqds: Move SPL macros to defconfig armv8: layerscape: Enabled I-cache for SPL boot armv8: ls1046ardb: Enable IFC for SPL build armv8: layerscape: Drop u-boot-with-spl.bin for selected boards powerpc: mpc85xx: Drop u-boot-with-spl.bin on selected boards spl: Add option SPL_PAYLOAD armv8: layerscape: spl: Initialize QSPI AHB for QSPI boot armv8: ls1046ardb: Add falcon mode for for QSPI boot Yuantian Tang (4): armv8: fsl: remove sata support armv8: dts: fsl-ls1012a: add sata node support scsi: ceva: add ls1012a soc support arm64: ls1012a: enable DM support for sata Makefile | 4 +- .../arm/cpu/armv8/fsl-layerscape/doc/README.falcon | 10 +++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 54 -------------- arch/arm/cpu/armv8/fsl-layerscape/spl.c | 8 ++ arch/arm/dts/fsl-ls1012a-2g5rdb.dts | 4 + arch/arm/dts/fsl-ls1012a-qds.dtsi | 4 + arch/arm/dts/fsl-ls1012a-rdb.dtsi | 4 + arch/arm/dts/fsl-ls1012a.dtsi | 8 ++ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 35 +-------- board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg | 26 +++++++ board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg | 7 ++ board/freescale/ls2080ardb/ls2080ardb.c | 2 +- common/spl/Kconfig | 10 +++ configs/ls1012a2g5rdb_qspi_defconfig | 7 +- configs/ls1012afrdm_qspi_defconfig | 1 + configs/ls1012aqds_qspi_defconfig | 8 +- configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 8 +- configs/ls1012ardb_qspi_defconfig | 8 +- configs/ls1043ardb_sdcard_defconfig | 1 - configs/ls1046aqds_qspi_defconfig | 1 + configs/ls1046aqds_sdcard_ifc_defconfig | 8 ++ configs/ls1046aqds_sdcard_qspi_defconfig | 9 +++ configs/ls1046ardb_emmc_defconfig | 8 ++ configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_qspi_defconfig | 1 + configs/ls1046ardb_qspi_spl_defconfig | 65 ++++++++++++++++ configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 8 ++ configs/ls1046ardb_sdcard_defconfig | 8 ++ configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088aqds_sdcard_qspi_defconfig | 1 + configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_qspi_defconfig | 1 + .../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1088ardb_sdcard_qspi_defconfig | 1 + configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 3 + configs/ls2088ardb_qspi_defconfig | 3 + drivers/ata/sata_ceva.c | 87 +++++++++++++--------- drivers/ddr/fsl/options.c | 14 ++-- include/configs/B4860QDS.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240QDS.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/ls1043a_common.h | 2 - include/configs/ls1046a_common.h | 32 ++++---- include/configs/ls1046ardb.h | 12 ++- include/configs/ls1088a_common.h | 11 ++- include/configs/ls1088ardb.h | 14 ++-- include/configs/ls2080a_common.h | 1 - include/configs/ls2080ardb.h | 4 - 54 files changed, 334 insertions(+), 182 deletions(-) create mode 100644 board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg create mode 100644 board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg create mode 100644 configs/ls1046ardb_qspi_spl_defconfig Thanks. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
