With some recent changes to relevant drivers here the openrd board
(openrd_client in this case) does not fit within its size constraint.
We can however drop the slightly extended baudrate table and then the
duplication of mtdparts/mtdids in the default environment. These
defaults are set in the environment by the 'mtdparts' command and
otherwise referenced throughout the code.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
include/configs/mv-common.h | 8 --------
include/configs/openrd.h | 4 +---
2 files changed, 1 insertion(+), 11 deletions(-)
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 79d61c599e54..8ae521f7e986 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -38,14 +38,6 @@
#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE
#endif
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200,230400, 460800, 921600 }
/* auto boot */
#define CONFIG_PREBOOT
diff --git a/include/configs/openrd.h b/include/configs/openrd.h
index 2b21003b8b75..17611bc56873 100644
--- a/include/configs/openrd.h
+++ b/include/configs/openrd.h
@@ -60,9 +60,7 @@
CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
"x_bootcmd_usb=usb start\0" \
- "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
- "mtdids="CONFIG_MTDIDS_DEFAULT"\0"
\
- "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"
+ "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
/*
* Ethernet Driver configuration
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
