On Wed, Jul 25, 2018 at 11:07 AM, Sébastien Szymanski
<sebastien.szyman...@armadeus.com> wrote:
> Commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,
> dm-spl") removes the u-boot,dm-spl properties from the imx6ul.dtsi file
> and breaks the OPOS6UL board.
> Add the u-boot,dm-spl properties to make the board boot again.
These should go into a imx6ul-opos6ul-u-boot.dtsi file so that when dt
files are synced from the kernel things like this aren't lost (again).
There's a number of examples of how that is done there.
Peter
> Fixes: commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for
> u-boot, dm-spl")
> Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
> ---
> arch/arm/dts/imx6ul-opos6ul.dtsi | 33 +++++++++++++++++++++++++++++++--
> 1 file changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/dts/imx6ul-opos6ul.dtsi
> b/arch/arm/dts/imx6ul-opos6ul.dtsi
> index d51ad4de20..7023842315 100644
> --- a/arch/arm/dts/imx6ul-opos6ul.dtsi
> +++ b/arch/arm/dts/imx6ul-opos6ul.dtsi
> @@ -99,7 +99,6 @@
>
> /* eMMC */
> &usdhc1 {
> - u-boot,dm-spl;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc1>;
> bus-width = <8>;
> @@ -162,7 +161,6 @@
> };
>
> pinctrl_usdhc1: usdhc1grp {
> - u-boot,dm-spl;
> fsl,pins = <
> MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
> @@ -192,3 +190,34 @@
> >;
> };
> };
> +
> +/* Specific to U-Boot */
> +/ {
> + soc {
> + u-boot,dm-spl;
> + };
> +};
> +
> +&aips1 {
> + u-boot,dm-spl;
> +
> + spba-bus@02000000 {
> + u-boot,dm-spl;
> + };
> +};
> +
> +&aips2 {
> + u-boot,dm-spl;
> +};
> +
> +&iomuxc {
> + u-boot,dm-spl;
> +};
> +
> +&pinctrl_usdhc1 {
> + u-boot,dm-spl;
> +};
> +
> +&usdhc1 {
> + u-boot,dm-spl;
> +};
> --
> 2.16.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
