On Sat, Jul 21, 2018 at 2:47 PM, Martin Kaiser <li...@kaiser.cx> wrote: > From: Martin Kaiser <mar...@kaiser.cx> > > The existing imx_watchdog driver is compatible with mx25 chipsets. > Add a WDOG1_BASE_ADDR define for the base address and enable the driver > in watchdog's Makefile. > > To use the driver, a board must define CONFIG_IMX_WATCHDOG and > CONFIG_HW_WATCHDOG. > > This fixes an issue when booting an mx25 chip via usb/serial. In this > case, the boot rom will always enable the watchdog. If u-boot is running > in interactive mode and the watchdog is not serviced, the system is > rebooted when the watchdog expires. > > Signed-off-by: Martin Kaiser <mar...@kaiser.cx>
Reviewed-by: Fabio Estevam <fabio.este...@nxp.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
