On Wed, Jul 18, 2018 at 09:38:44PM +0200, Guillaume GARDET wrote: > commit d233ccb1d84b901f7e23e6d9b4f2c6a57198b23b > ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
I have found no compile or runtime issues, on my BeagleBoard Rev. C4 or xM, with the current default configuration. At least, for my non-EFI boot environment. The following items are brought in from the EFI config additions: +CONFIG_SMBIOS_PRODUCT_NAME="beagle" +CONFIG_CMD_BOOTEFI=y +CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y +CONFIG_EFI_PARTITION=y +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=128 +CONFIG_EFI_PARTITION_ENTRIES_OFF=0 +CONFIG_SPL_EFI_PARTITION=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_GENERATE_SMBIOS_TABLE=y +CONFIG_SMBIOS_MANUFACTURER="ti" +CONFIG_EFI_LOADER=y I would change the commit message though. It was not a mistake. It was removed to provide a minimal set of configuration options for the base BSP type of setup. Using EFI is a choice. In fact, I tested my changes on 3 different OMAP3 boards. So there has been no period of not working in the basic board configuration. Provably. So if EFI is required, even though one may not use it, this is a don't care for me. My boards boot just fine without EFI. Derald > Signed-off-by: Guillaume GARDET <guillaume.gar...@free.fr> > Cc: Derald D. Woods <woods.techni...@gmail.com> > Cc: Tom Rini <tr...@konsulko.com> > > --- > configs/omap3_beagle_defconfig | 3 --- > 1 file changed, 3 deletions(-) > > diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig > index a37a38f881..1e1a391d7f 100644 > --- a/configs/omap3_beagle_defconfig > +++ b/configs/omap3_beagle_defconfig > @@ -32,8 +32,6 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" > > CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)" > CONFIG_CMD_UBI=y > # CONFIG_ISO_PARTITION is not set > -# CONFIG_EFI_PARTITION is not set > -CONFIG_SPL_PARTITION_UUIDS=y > CONFIG_OF_CONTROL=y > CONFIG_ENV_IS_IN_NAND=y > CONFIG_SPL_DM=y > @@ -79,4 +77,3 @@ CONFIG_USB_ETHER_SMSC95XX=y > CONFIG_FAT_WRITE=y > CONFIG_BCH=y > CONFIG_SPL_OF_LIBFDT=y > -# CONFIG_EFI_LOADER is not set > -- > 2.18.0 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
