Disable the use of function zynq_loadfs when compiling
the driver for the SPL, as the following filesystem
functions are not found by the linker:
- fs_set_blk_dev
- fs_read
- fs_set_blk_dev
- fs_read
- fs_read
Signed-off-by: Luis Araneda <luaran...@gmail.com>
---
drivers/fpga/zynqpl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c
index fd37d18c7f..8e49c7010e 100644
--- a/drivers/fpga/zynqpl.c
+++ b/drivers/fpga/zynqpl.c
@@ -410,7 +410,7 @@ static int zynq_load(xilinx_desc *desc, const void *buf,
size_t bsize,
return FPGA_SUCCESS;
}
-#if defined(CONFIG_CMD_FPGA_LOADFS)
+#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
fpga_fs_info *fsinfo)
{
@@ -493,7 +493,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf,
size_t bsize,
struct xilinx_fpga_op zynq_op = {
.load = zynq_load,
-#if defined(CONFIG_CMD_FPGA_LOADFS)
+#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
.loadfs = zynq_loadfs,
#endif
};
--
2.18.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
