On Tue, 2018-07-17 at 01:41 +0000, Henry Beberman wrote: > > -----Original Message----- > > From: Trent Piepho <tpie...@impinj.com> > > Sent: Monday, July 16, 2018 11:22 AM > > To: Henry Beberman <henry.beber...@microsoft.com>; u- > > b...@lists.denx.de > > Cc: fabio.este...@nxp.com; adrian.alo...@nxp.com > > Subject: Re: [U-Boot] [PATCH 06/11] mx7dsabresd: Add Windows boot > > support for iMX7 Sabre > > > > On Sat, 2018-07-14 at 00:11 +0000, Henry Beberman wrote: > > > From: Henry Beberman <henry.beber...@microsoft.com> > > > > > > This patch adds a new bootable configuration for Windows 10 IoT Core > > > on the i.MX7 Dual Sabre board. > > > > > > It enables SPL on the i.MX7 Sabre in order to support the FIT load of > > > OP-TEE and U-Boot proper. > > > > > > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index > > > f186120684..3fb9b72703 100644 > > > --- a/drivers/gpio/Makefile > > > +++ b/drivers/gpio/Makefile > > > @@ -7,10 +7,13 @@ ifndef CONFIG_SPL_BUILD > > > obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o > > > obj-$(CONFIG_AXP_GPIO) += axp_gpio.o > > > endif > > > + > > > +ifeq ($(CONFIG_$(SPL_TPL_)DM),y) > > > obj-$(CONFIG_DM_GPIO) += gpio-uclass.o > > > > > > obj-$(CONFIG_DM_PCA953X) += pca953x_gpio.o > > > obj-$(CONFIG_DM_74X164) += 74x164_gpio.o > > > +endif > > > > It doesn't look like this patch is specific to mx7 or Windows. Perhaps it > > should > > be in a different commit? > > I agree that this change probably belongs in its own patch. > I've left it in this patch so far because it's required to build the new > mx7dsabresd_nt_defconfig.
Easy enough to split out and put first. The person on different hardware trying to figure out the u-boot build spaghetti it's helped much knowing the person who added it was working on windows 10 support, but nothing about the reason for this change. > > Also, the help text for SPL_DM says it turns on basic DM support in SPL. > > But > > not any specific hardware drivers. Those all have additional config > > options to > > turn them on. It doesn't seems right to bundle a selection of GPIO drivers > > along with CONFIG_SPL_DM. > > This issue has cropped up because this patch adds SPL support to mx7dsabresd, > but intentionally does not enable SPL_DM. > The defconfig contains CONFIG_DM_74X164 for use in U-Boot Proper, but because > drivers/gpio/Makefile also runs during the SPL portion of the build that > config still pulls in the 74X164 driver which fails to build due to missing > dependencies. > > Wrapping the DM objects in CONFIG_$(SPL_TPL_)DM ensures that DM is actually > enabled for the current portion of the build when deciding to build the DM > drivers. But isn't it odd that not a single other driver is wrapped this way? What's special here? I think the underlying flaw is the the kbuild system doesn't support the concept of building multiple times in different modes, e.g. main, SPL, TPL. And rather than design something, one gets layers of board specific hacks. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
