Hi Joe,
> -----Original Message-----
> From: Joe Hershberger [mailto:joe.hershber...@ni.com]
> Sent: Thursday, July 12, 2018 12:26 AM
> To: Siva Durga Prasad Paladugu <siva...@xilinx.com>; Grygorii Strashko
> <grygorii.stras...@ti.com>
> Cc: u-boot <u-boot@lists.denx.de>; Joe Hershberger
> <joe.hershber...@ni.com>; Michal Simek <mich...@xilinx.com>; Vipul
> Kumar <vip...@xilinx.com>
> Subject: Re: [U-Boot] [PATCH 3/3] net: zynq_gem: convert to use livetree
>
> Hi Siva,
>
> On Fri, Jul 6, 2018 at 5:10 AM, Siva Durga Prasad Paladugu
> <siva.durga.palad...@xilinx.com> wrote:
> > This patch updates the zynq gem driver to support livetree.
> >
> > Signed-off-by: Siva Durga Prasad Paladugu
> > <siva.durga.palad...@xilinx.com>
> > Signed-off-by: Vipul Kumar <vipul.ku...@xilinx.com>
> > ---
> > drivers/net/zynq_gem.c | 29 ++++++++++++++---------------
> > 1 file changed, 14 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index
> > a817f2e..b9858e4 100644
> > --- a/drivers/net/zynq_gem.c
> > +++ b/drivers/net/zynq_gem.c
> > @@ -178,7 +178,7 @@ struct zynq_gem_priv {
> > struct zynq_gem_regs *iobase;
> > phy_interface_t interface;
> > struct phy_device *phydev;
> > - int phy_of_handle;
> > + ofnode phy_of_node;
> > struct mii_dev *bus;
> > struct clk clk;
> > u32 max_speed;
> > @@ -349,8 +349,7 @@ static int zynq_phy_init(struct udevice *dev)
> >
> > priv->phydev->advertising = priv->phydev->supported;
> >
> > - if (priv->phy_of_handle > 0)
> > - dev_set_of_offset(priv->phydev->dev, priv->phy_of_handle);
> > + priv->phydev->dev->node = priv->phy_of_node;
> >
> > return phy_config(priv->phydev); } @@ -693,21 +692,23 @@
> > static int zynq_gem_ofdata_to_platdata(struct udevice *dev) {
> > struct eth_pdata *pdata = dev_get_platdata(dev);
> > struct zynq_gem_priv *priv = dev_get_priv(dev);
> > - int node = dev_of_offset(dev);
> > + struct ofnode_phandle_args phandle_args;
> > const char *phy_mode;
> >
> > - pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
> > + pdata->iobase = (phys_addr_t)dev_read_addr(dev);
> > priv->iobase = (struct zynq_gem_regs *)pdata->iobase;
> > /* Hardcode for now */
> > priv->phyaddr = -1;
> >
> > - priv->phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, node,
> > - "phy-handle");
> > - if (priv->phy_of_handle > 0)
> > - priv->phyaddr = fdtdec_get_int(gd->fdt_blob,
> > - priv->phy_of_handle, "reg", -1);
> > + if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
> > + &phandle_args)) {
> > + debug("phy-handle does not exist %s\n", dev->name);
> > + return -ENOENT;
> > + }
> >
> > - phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
> > + priv->phyaddr = ofnode_read_u32_default(phandle_args.node,
> "reg", -1);
> > + priv->phy_of_node = phandle_args.node;
> > + phy_mode = dev_read_prop(dev, "phy-mode", NULL);
>
> I want to make sure we are in sync here. I plan to take Grygorii's series.
>
> Thanks!
Thanks for informing. No problem, I will make changes as per Grygorii's series
and will test it sometime this week.
Thanks,
Siva
>
> > if (phy_mode)
> > pdata->phy_interface =
> phy_get_interface_by_name(phy_mode);
> > if (pdata->phy_interface == -1) { @@ -716,10 +717,8 @@ static
> > int zynq_gem_ofdata_to_platdata(struct udevice *dev)
> > }
> > priv->interface = pdata->phy_interface;
> >
> > - priv->max_speed = fdtdec_get_uint(gd->fdt_blob, priv-
> >phy_of_handle,
> > - "max-speed", SPEED_1000);
> > - priv->int_pcs = fdtdec_get_bool(gd->fdt_blob, node,
> > - "is-internal-pcspma");
> > + priv->max_speed = dev_read_u32_default(dev, "max-speed",
> SPEED_1000);
> > + priv->int_pcs = dev_read_bool(dev, "is-internal-pcspma");
> >
> > printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv-
> >iobase,
> > priv->phyaddr,
> > phy_string_for_interface(priv->interface));
> > --
> > 2.7.4
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot@lists.denx.de
> > https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
