On Thu, Jul 12, 2018 at 1:52 PM, Adam Sampson <a...@offog.org> wrote: > On Thu, Jul 12, 2018 at 12:40:14PM +0530, Jagan Teki wrote: >> Did you test eMMC in any of A10 look it is not detecting during SD >> boot and vice-versa happened during eMMC boot. May be it's because of >> pincrtrl for U-Boot which is not initializing for in DM_MMC. > > No, I don't have any boards with eMMC, so I haven't tested eMMC with > either A10 or A20, I'm afraid. > > (I also haven't been able to find an A13 board to test with -- if there > are any A13 owners reading this, I suspect a similar change would work, > and it'll need doing before the A13 boards get removed for not having DM > support...)
Look like there is no eMMC on A10, atleast on existing boards in ML. I understand the eMMC issues with existing dt driver will send the patches for the same. sun4i iNet 3F, 3W has missing mmc0 node on DT, DM_MMC need to have this. anyway I'm sending all in one series. Applied to u-boot-sunxi/master _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
