There are some compiler warnings. These should be resolved. mx51evk.ERR
soc.c: In function 'print_cpuinfo': soc.c:68: warning: implicit declaration of function 'get_mcu_main_clk' soc.c: In function 'cpu_mmc_init': soc.c:99: warning: implicit declaration of function 'fsl_esdhc_mmc_init' clock.c:45: warning: initialization makes pointer from integer without a cast speed.c: In function 'get_clocks': speed.c:35: warning: implicit declaration of function 'mxc_get_clock' mx51evk.c: In function 'board_init': mx51evk.c:354: warning: implicit declaration of function 'get_cpu_rev' Tom Stefano Babic wrote: > Hi Tom, > > The following changes since commit f3651764e57e353251695691677bd95ba5a420bc: > Frans Meulenbroeks (1): > cmd_itest.c: fix pointer dereferencing > > are available in the git repository at: > > git://git.denx.de/u-boot-imx master > > John Rigby (5): > mxc_serial replace platform specific clock > Add support for Freescale MX25 SOC > fec_mxc: cleanup and factor out MX27 dependencies > fec_mxc: add MX25 support > Add support for KARO TX25 board > > Stefano Babic (9): > MX51: Add initial support for the Freescale MX51 > MX51: Add register definitions > MX51: Add pin and multiplexer definitions. > serial_mxc: add support for MX51 processor > mmc: check correctness of the voltage mask in ocr > MMC: add weak function to detect MMC/SD card > ARM: add accessors functions > fsl_esdhc: add support for mx51 processor > Add initial support for Freescale mx51evk board > > MAINTAINERS | 8 + > MAKEALL | 1 + > Makefile | 8 + > board/freescale/mx51evk/Makefile | 48 ++++ > board/freescale/mx51evk/config.mk | 25 ++ > board/freescale/mx51evk/imximage.cfg | 119 +++++++++ > board/freescale/mx51evk/mx51evk.c | 406 > ++++++++++++++++++++++++++++ > board/freescale/mx51evk/mx51evk.h | 51 ++++ > board/karo/tx25/Makefile | 51 ++++ > board/karo/tx25/config.mk | 5 + > board/karo/tx25/lowlevel_init.S | 131 +++++++++ > board/karo/tx25/tx25.c | 176 +++++++++++++ > cpu/arm926ejs/mx25/Makefile | 46 ++++ > cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++++++++ > cpu/arm926ejs/mx25/reset.c | 56 ++++ > cpu/arm926ejs/mx25/timer.c | 187 +++++++++++++ > cpu/arm926ejs/mx27/generic.c | 5 + > cpu/arm_cortexa8/mx51/Makefile | 48 ++++ > cpu/arm_cortexa8/mx51/clock.c | 293 +++++++++++++++++++++ > cpu/arm_cortexa8/mx51/iomux.c | 165 ++++++++++++ > cpu/arm_cortexa8/mx51/lowlevel_init.S | 289 ++++++++++++++++++++ > cpu/arm_cortexa8/mx51/soc.c | 109 ++++++++ > cpu/arm_cortexa8/mx51/speed.c | 38 +++ > cpu/arm_cortexa8/mx51/timer.c | 119 +++++++++ > cpu/arm_cortexa8/mx51/u-boot.lds | 61 +++++ > drivers/mmc/fsl_esdhc.c | 149 +++++++---- > drivers/mmc/mmc.c | 17 ++- > drivers/net/fec_mxc.c | 44 +++- > drivers/net/fec_mxc.h | 32 +++- > drivers/serial/serial_mxc.c | 28 ++- > include/asm-arm/arch-mx25/clock.h | 36 +++ > include/asm-arm/arch-mx25/imx-regs.h | 316 ++++++++++++++++++++++ > include/asm-arm/arch-mx25/imx25-pinmux.h | 421 > ++++++++++++++++++++++++++++++ > include/asm-arm/arch-mx27/clock.h | 3 + > include/asm-arm/arch-mx31/mx31.h | 1 + > include/asm-arm/arch-mx51/asm-offsets.h | 50 ++++ > include/asm-arm/arch-mx51/clock.h | 31 +++ > include/asm-arm/arch-mx51/crm_regs.h | 192 ++++++++++++++ > include/asm-arm/arch-mx51/imx-regs.h | 282 ++++++++++++++++++++ > include/asm-arm/arch-mx51/iomux.h | 193 ++++++++++++++ > include/asm-arm/arch-mx51/mx51_pins.h | 374 ++++++++++++++++++++++++++ > include/asm-arm/global_data.h | 3 + > include/asm-arm/io.h | 55 ++++ > include/configs/mx51evk.h | 172 ++++++++++++ > include/configs/tx25.h | 179 +++++++++++++ > include/fsl_esdhc.h | 27 ++ > include/mmc.h | 1 + > lib_arm/board.c | 3 + > nand_spl/board/karo/tx25/Makefile | 78 ++++++ > nand_spl/board/karo/tx25/config.mk | 1 + > nand_spl/board/karo/tx25/u-boot.lds | 58 ++++ > 51 files changed, 5386 insertions(+), 68 deletions(-) > create mode 100644 board/freescale/mx51evk/Makefile > create mode 100644 board/freescale/mx51evk/config.mk > create mode 100644 board/freescale/mx51evk/imximage.cfg > create mode 100644 board/freescale/mx51evk/mx51evk.c > create mode 100644 board/freescale/mx51evk/mx51evk.h > create mode 100644 board/karo/tx25/Makefile > create mode 100644 board/karo/tx25/config.mk > create mode 100644 board/karo/tx25/lowlevel_init.S > create mode 100644 board/karo/tx25/tx25.c > create mode 100644 cpu/arm926ejs/mx25/Makefile > create mode 100644 cpu/arm926ejs/mx25/generic.c > create mode 100644 cpu/arm926ejs/mx25/reset.c > create mode 100644 cpu/arm926ejs/mx25/timer.c > create mode 100644 cpu/arm_cortexa8/mx51/Makefile > create mode 100644 cpu/arm_cortexa8/mx51/clock.c > create mode 100644 cpu/arm_cortexa8/mx51/iomux.c > create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S > create mode 100644 cpu/arm_cortexa8/mx51/soc.c > create mode 100644 cpu/arm_cortexa8/mx51/speed.c > create mode 100644 cpu/arm_cortexa8/mx51/timer.c > create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds > create mode 100644 include/asm-arm/arch-mx25/clock.h > create mode 100644 include/asm-arm/arch-mx25/imx-regs.h > create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h > create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h > create mode 100644 include/asm-arm/arch-mx51/clock.h > create mode 100644 include/asm-arm/arch-mx51/crm_regs.h > create mode 100644 include/asm-arm/arch-mx51/imx-regs.h > create mode 100644 include/asm-arm/arch-mx51/iomux.h > create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h > create mode 100644 include/configs/mx51evk.h > create mode 100644 include/configs/tx25.h > create mode 100644 nand_spl/board/karo/tx25/Makefile > create mode 100644 nand_spl/board/karo/tx25/config.mk > create mode 100644 nand_spl/board/karo/tx25/u-boot.lds > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
