On Wed, Jul 11, 2018 at 12:28 PM, Chen-Yu Tsai <w...@csie.org> wrote: > On Wed, Jul 11, 2018 at 11:53 AM, Chen-Yu Tsai <w...@csie.org> wrote: >> On Tue, Jul 10, 2018 at 2:13 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote: >>> On Tue, Jul 10, 2018 at 8:34 AM, Chen-Yu Tsai <w...@csie.org> wrote: >>>> This is on a Libre Computer ALL-H3-CC H3 variant. Still running a >>>> bisect, but v2018.07-rc1 is a working version. From the EHCI error >>>> messages, I'm thinking it might be related to the USB changes lately. >>>> Not sure if any other SoCs (ex. A64) are broken or not at the moment. >>> >>> I'm able to boot with BPI-M2+, where I changed the configurations >>> based on Libre Computer board. >>> - remove/disable ehci0, ohci0 >>> - enable ehci1, 2, 3 and ohci1, 2, 3 >>> - remove/disable usb_otg node >>> - disable MUSB_GADGET >> >> On BPI-M2+, with Sinovoip_BPI_M2_Plus_defconfig, >> cross-compiled using gcc version 7.3.0 (Debian 7.3.0-20) > > OK. I dropped back to GCC 6.4.1 from Linaro's 2017.11 release. > It now works. Will try Linaro's other toolchains later.
OK, I used Linaro GCC 6.3-2017.02 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
