This converts the following to Kconfig:
CONFIG_NAND_LPC32XX_SLC
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 14c24ce6f2..8a37122104 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -34,6 +34,7 @@ CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_NAND=y
+CONFIG_NAND_LPC32XX_SLC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_PHYLIB=y
CONFIG_PHY_ADDR_ENABLE=y
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 420a220c81..2915d59f4c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -37,6 +37,11 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
of OOB area before last ECC sector data starts. This is potentially
used to preserve the bad block marker in the OOB area.
+config NAND_LPC32XX_SLC
+ bool "Support LPC32XX_SLC controller"
+ help
+ Enable the LPC32XX SLC NAND controller.
+
config NAND_OMAP_GPMC
bool "Support OMAP GPMC NAND controller"
depends on ARCH_OMAP2PLUS
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index d12f37150b..00e9c44fdf 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -84,7 +84,6 @@
/*
* NAND controller
*/
-#define CONFIG_NAND_LPC32XX_SLC
#define CONFIG_SYS_NAND_BASE SLC_NAND_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 42dc722251..baecbbbfa3 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1381,7 +1381,6 @@ CONFIG_NAND_FSMC
CONFIG_NAND_KIRKWOOD
CONFIG_NAND_KMETER1
CONFIG_NAND_LPC32XX_MLC
-CONFIG_NAND_LPC32XX_SLC
CONFIG_NAND_MODE_REG
CONFIG_NAND_MXC_V1_1
CONFIG_NAND_OMAP_ECCSCHEME
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
