On Sat, May 19, 2018 at 02:08:53PM +0200, Dr. Philipp Tomsich wrote:
> Marty,
>
> > On 19 May 2018, at 12:40, Marty E. Plummer <hanet...@startmail.com> wrote:
> >
> > So explain to me what you'd like me to do here, if you would. What I
> > gather from this is you want me to flip CONFIG_PHYS_64BIT and see if it
> > works or what? I can flash/reflash u-boot and coreboot pretty easily on
> > the device, so I'm down for any sort of hardware testing needed to get
> > this into a usable state.
>
> Yes, just enable PHYS_64BIT and report on how far it goes (activating some
> debug may be helpful to understand what goes wrong, if it fails).
>
> My gut feeling is that it could work, but there’s a number of pitfalls and we
> may
> not be lucky.
>
Testing flipping CONFIG_PHYS_64BIT, both with and without my 'clamping'
patch to sdram_common.c, has the same results, in that all that is
output on the servo console is that wierd <?> output. Where to from
here, then?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
