Hi
On Wed, Jul 4, 2018 at 6:45 PM, Otavio Salvador <otavio.salva...@ossystems.com.br> wrote: > On Tue, Jul 3, 2018 at 6:20 AM, Michael Nazzareno Trimarchi > <mich...@amarulasolutions.com> wrote: >> Ok I have fixed it :) > > Mind to share how? commit 9c066153a6876b1ae57117d99ad228a07873eb75 Author: Michael Trimarchi <mich...@amarulasolutions.com> Date: Wed Jul 4 15:50:41 2018 +0200 spl: Make the spl_nand_load_image static Change-Id: I1c2f71e75fc052c54fc94b13d0942cb9e75ff1c6 Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com> diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index b96fce2..527cfc0 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -12,7 +12,7 @@ #include <fdt.h> #if defined(CONFIG_SPL_NAND_RAW_ONLY) -int spl_nand_load_image(struct spl_image_info *spl_image, +static int spl_nand_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { nand_init(); michael@panicking ~/work/amarula/w_and_h/dist/u-boot $ git show HEAD^^^ commit 110e91ee5a837684d99778d72a3c9aec5953baf6 Author: Michael Trimarchi <mich...@amarulasolutions.com> Date: Wed Jul 4 13:03:23 2018 +0200 video: mxsfb: Allocate a memory align to the page We want to allocate memory align at page size because we then need to reserve it to linux and simple frame buffer. The lcd should not be powerdown if simple frame buffer configuration is active Change-Id: I1d139364d91686b12cd607821dcc1b84b0dc0b69 Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com> diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 4011066..0aaf9f0 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -2107,6 +2107,12 @@ static int cfg_video_init(void) video_console_address = video_fb_address; #endif + env_set_hex("video_address", (unsigned long)VIDEO_FB_ADRS); + env_set_hex("video_memory_size", (unsigned long) roundup(VIDEO_SIZE, PAGE_SIZE)); + env_set_hex("video_stride", (unsigned long) VIDEO_LINE_LEN); + env_set_hex("video_width", (unsigned long) VIDEO_COLS); + env_set_hex("video_height", (unsigned long) VIDEO_ROWS); + /* Initialize the console */ console_col = 0; console_row = 0; diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 4e3e3d7..254f230 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -7,6 +7,7 @@ #include <common.h> #include <malloc.h> #include <video_fb.h> +#include <lcd.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> @@ -145,6 +146,7 @@ static void mxs_lcd_init(GraphicDevice *panel, writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set); } +#ifndef CONFIG_VIDEO_DT_SIMPLEFB void lcdif_power_down(void) { struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; @@ -164,6 +166,9 @@ void lcdif_power_down(void) } mxs_reset_block((struct mxs_register_32 *)®s->hw_lcdif_ctrl_reg); } +#else +void lcdif_power_down(void) {}; +#endif void *video_hw_init(void) { @@ -214,8 +219,8 @@ void *video_hw_init(void) panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; /* Allocate framebuffer */ - fb = memalign(ARCH_DMA_MINALIGN, - roundup(panel.memSize, ARCH_DMA_MINALIGN)); + fb = memalign(PAGE_SIZE, + roundup(panel.memSize, PAGE_SIZE)); if (!fb) { printf("MXSFB: Error allocating framebuffer!\n"); return NULL; (END) { struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; @@ -164,6 +166,9 @@ void lcdif_power_down(void) } mxs_reset_block((struct mxs_register_32 *)®s->hw_lcdif_ctrl_reg); } +#else +void lcdif_power_down(void) {}; +#endif void *video_hw_init(void) { @@ -214,8 +219,8 @@ void *video_hw_init(void) panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; /* Allocate framebuffer */ - fb = memalign(ARCH_DMA_MINALIGN, - roundup(panel.memSize, ARCH_DMA_MINALIGN)); + fb = memalign(PAGE_SIZE, + roundup(panel.memSize, PAGE_SIZE)); if (!fb) { printf("MXSFB: Error allocating framebuffer!\n"); return NULL; The I need to trick the dts ;) This should be more then enough ;). Michael > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750 -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot