Dear Naveen Krishna Ch,
On 1 March 2010 14:05, Naveen Krishna Ch <naveenkrishna...@gmail.com> wrote:
> Hi kang,
>
> On 26 February 2010 21:21, Minkyu Kang <proms...@gmail.com> wrote:
>>
>> Dear Naveen Krishna CH,
>>
>> On 26 February 2010 20:47, <ch.nav...@samsung.com> wrote:
>> > From: Naveen Krishna CH <ch.nav...@samsung.com>
>> >
>> > Add setup for ethernet on SMDKC100, allowing kernel/ramdisk to be
>> > loaded over tftp.
>> >
>> > The preinit function will configure GPIO (GPK0CON) & SROMC to look
>> > for environment in SROM Bank 3.
>> >
>> > Signed-off-by: Naveen Krishna Ch <ch.nav...@samsung.com>
>> > ---
>> > Changes since V1:
>> >
>> > 1. The CONFIG_BOOTP* and Net config Macros are removed from config
>> > header.
>> > Comments from Ben Warren are fixed
>> > 2. The GPIO configuration is modified & Macro and Function are renamed.
>> > Comments from Minkyu Kang are fixedChanges since V2
>> >
>> > Changes since V2:
>> > 1. GPIO configurations function has been implemented.
>> >
>> > Changes since V3:
>> > 1. Comments from Minkyu Kang are fixed.
>> >
>> > Changes since V4:
>> > None
>> >
>> > Changes since v5:
>> > 1. Compile time warning are fixed.
>> >
>> > board/samsung/smdkc100/smdkc100.c | 40
>> > +++++++++++++++++++++++++++++++++++++
>> > include/configs/smdkc100.h | 12 ++++++++++-
>> > 2 files changed, 51 insertions(+), 1 deletions(-)
>> >
>> > diff --git a/board/samsung/smdkc100/smdkc100.c
>> > b/board/samsung/smdkc100/smdkc100.c
>> > index 15a1a27..76bd4cc 100644
>> > --- a/board/samsung/smdkc100/smdkc100.c
>> > +++ b/board/samsung/smdkc100/smdkc100.c
>> > @@ -23,10 +23,41 @@
>> > */
>> >
>> > #include <common.h>
>> > +#include <asm/io.h>
>> > +#include <asm/arch/smc.h>
>> > +#include <asm/arch/gpio.h>
>> > +#include <netdev.h>
>> > +
>> > DECLARE_GLOBAL_DATA_PTR;
>> >
>> > +/*
>> > + * Miscellaneous platform dependent initialisations
>> > + */
>> > +static void smc9115_pre_init(void)
>> > +{
>> > + u32 tmp;
>>
>> Why didn't delete this variable?
>
> My Bad, Patch replaced. Can i send this one alone as v6 or
> should i send the patch set again as v7
Please send next version.
>>
>> > + u32 smc_bw_conf, smc_bc_conf;
>> > +
>> > + struct s5pc100_gpio *const gpio =
>> > + (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
>> > +
>> > + /* gpio configuration GPK0CON */
>> > + gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK,
>> > GPIO_FUNC(2));
>> > +
>> > + /* Ethernet needs bus width of 16 bits */
>> > + smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
>> > + smc_bc_conf = SMC_BC_TACS(0x0) | SMC_BC_TCOS(0x4) |
>> > SMC_BC_TACC(0xe)
>> > + | SMC_BC_TCOH(0x1) | SMC_BC_TAH(0x4)
>> > + | SMC_BC_TACP(0x6) | SMC_BC_PMC(0x0);
>> > +
>> > + /* Select and configure the SROMC bank */
>> > + s5pc1xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf,
>> > smc_bc_conf);
>> > +}
>> > +
>>
>> Thanks
>> Minkyu Kang
>> --
>> from. prom.
>> www.promsoft.net
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot@lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
> --
> Shine bright,
> (: Naveen Krishna Ch :)
>
Thanks
Minkyu Kang
--
from. prom.
www.promsoft.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
